Solar Illuminations own designed accessory. This kit consists of a unique, heavy duty steel clamp which is suitable for fixing to a vertical or horizontal surface or to a round pole or round post. It can also be used to fix to a square post or pole with suitable mounting footprint. Once secured, this clamp will enable either our FL05, FL06, FL09 and FL10 floodlights to attach to it. If you intend to use this clamp to attach one of our floodlights to a round pole, it willl fit a pole from approximately 3" diameter up to approximately 5 1/2" diameter. Easy to install. Simply adjust the clamp around the pole and tighten the four nuts & bolts. If you have a pole of larger diameter, this clamp can still be used but surface mounted directly to the pole and screwed or bolted into place. For installation to a vertical or horizontal surface simply discard the round back-plate of the clamp and screw or bolt the flat side of the mounting plate to your surface. Colour of clamp is black.

TECHNICAL SPECIFICATIONS

One year warranty*.
Lifetime unlimited technical support.
14 day 'no hassle' returns (refund or exchange on new, unused/uninstalled products)*.

Manufactured in an ISO9001:2000 'Quality Assured' facility.
Steel clamp attachment kit for our FL05, FL06, FL09 and FL10 floodlights.
Black painted finish.
Easy to install.
Fits almost any round pole or round post from approx. 7cm (3") diameter up to approx 14cm (5 1/2") diameter.
Simply clamps and locks around a pole or post.
Can be used without the clamp piece.
When used without the clamp piece it can be fixed to almost any flat surface (horizontal or vertical).
Can be attached to a square sided post.
Can be attached to a larger diameter pole or post directly, by removing the clamp piece and direct surface mounting.
Floodlight mounting is on T-bar section and has universal mounting points to accomodate our FL05, FL06, FL09 and FL10 floodlights.
You may need to drill two new holes in this clamp to enble attachment of an FL06 floodlight to this clamp.
Footprint of base is approx 18cm x 10cm (7" x 4") Length x Width.
Stand-off/T-bar section (base/clamp to floodlight fixture mounting point) is approx. 20cm (8").
Nuts, bolts and washers included for standard installation.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.