Solar Illuminations own designed accessory. This kit consists of a unique, heavy duty steel clamp which is suitable for fixing to a vertical or horizontal surface or to a round pole or round post. It can also be used to fix to almost any flat surface (horizontal or vertical) or possibly to a square sided post. Once secured, this clamp will enable either a 6w, 7w, 10w, 14w, 20w or 30w solar panel to attach to it. These are the solar panels that we offer with our FL05, FL06 and FL10 floodlights. If you intend to use this clamp to attach one of our solar panels to a round pole such as a flag pole, it willl fit a pole from approximately 7cm (3") diameter up to approximately 14cm (5 1/2") diameter. Easy to install. Simply adjust the clamp around the pole and tighten the four nuts & bolts. If you have a pole of larger diameter, this clamp can still be used but surface mounted directly to the pole and screwed or bolted into place. For installation to a vertical or horizontal surface simply discard the round back-plate of the clamp and screw or bolt the flat side of the mounting plate to your surface. The solar panel attachment piece is adjustable so it can accept the different width of a solar panel. It also has a locking pivot joint so that the solar panel can be adjusted to it most suitable angle (typically around 45 degrees). Colour of clamp is black.

TECHNICAL SPECIFICATIONS

One year warranty*.
Lifetime unlimited technical support.
14 day 'no hassle' returns (refund or exchange on new, unused/uninstalled products)*.

Manufactured in an ISO9001:2000 'Quality Assured' facility.
Steel clamp attachment kit for our 6w, 7w, 10w, 14w, 20w and 30w solar panels.
These are the solar panels that we offer with our FL05, FL06 and FL10 floodlights.
Black painted finish.
Easy to install.
Fits almost any round pole or round post from approx 7cm (3") diameter up to approx 14cm (5 1/2") diameter.
Simply clamps and locks around a pole or post.
Can be used without the clamp piece.
When used without the (half round) clamp piece, it can be fixed to almost any flat surface (horizontal or vertical).
Can be attached to a square sided post.
Can be attached to a larger diameter pole or post directly, by removing the clamp piece and direct surface mounting.
Solar panel mounting is off the T-bar section and has and adjustable mechanism to allow for different sized solar panels.
Swivel joint to allow the solar panel to be correctly aligned (typically approx 45 degrees).
Footprint of base is approx. 18cm x 10cm (7" x 4") Length x Width.
Stand-off/T-bar section (base/clamp to solar panel mounting point) is approx. 20cm (8").
A solar panel from approx. 20cm (8") wide up to 35cm (14") wide can be accepted.
Nuts, bolts and washers included for standard installation.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.