This heavy duty solar panel clamp attachment kit was designed by us through popular demand. It enables our 6w, 7w, 10w, 14w or 20w solar panel to attach directly to a round pole or most vertical or horizontal surfaces and still allows the solar panel to be adjusted to the desired angle.
This kit consists of a heavy duty steel clamp which is suitable for attaching solar panels to a round pole or post. It can also be used to fix to almost any flat surface (horizontal or vertical). Once secured, this clamp will enable a 6w, 7w, 10w, 14w, or 20w solar panel to attach to it. Such panels are usually sold with FL05, and FL06 light kits, as well as some other light systems. Fits poles up to approximately 9cm (3.5") diameter. Easy to install. The bracket is supplied with two adjustable banding pieces that attach it to the pole. Simply wrap the banding around the pole and through the bracket, and tighten the banding for a secure fit. This bracket may be surface mounted directly to a pole if pole diameter is too large, or yyou can use larger banding. For installation to a vertical or horizontal surface, discard the banding, and screw or bolt the flat side of the mounting plate to the surface. The solar panel attachment piece is adjustable and allows for various solar panel widths. Colour of clamp is grey.
Used to mount solar panels on a pole with diameters ranging up to 9cm (3.5”). Can be used with 6 watt, 7 watt, 10 watt, 14 watt, or 20 watt solar panels.
Manufactured in an ISO9001:2008 'Quality Assured' facility.
Steel clamp attachment kit for our 6w, 7w, 10w, 14w, and 20w solar panels.
For solar panels supplied with our FL05, FL06 light kits, as well as other light systems.
Grey painted finish.
Easy to install.
Fits almost any round pole or round post up to approx. 9cm (3.5") diameter.
Simply clamps and locks around a pole or post.
Can be fixed to almost any flat surface without the use of the banding pieces.
Can be attached to a square sided post.
Can be attached to a larger diameter pole or post directly, by removing the banding and direct surface mounting, or by using larger banding.
Lenght of the support arm is approx. 47cm (17").
Nuts, bolts and washers included for standard installation.
Minor errors & omissions must be accepted. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.