This solar powered lamp post retains a traditional design while providing an exceptional light output. Great for commercial applications such as private developments, housing estates, footpaths, parks, entrance ways etc. This model is supplied with a choice of 3m or 4m root mount or flange mount column.
This commercial grade lamp post is our own design. The huge cast aluminium lampshade is fitted with four glass panels and contains a super bright LED bulb. The light output is 500 Lumens, and is comparable to a 75 watt light bulb. This product also includes a programmable control module, which allows for customized illumination time. There are three powerful solar panels that are each built neatly and discretely into the top of the lampshade. Once installed, the solar panels are barely noticeable and blend in within the design of the lampshade. The light will automatically illuminate when it gets dark, and typically illuminates for up to several hours The user or installer can set the programmable control module to enable the light to come on at dusk and illuminate for a pre-set amount of hours. Colour of light output is white. Colour of product is black. Colour of column is unpainted (galvanised steel) but may be painted any colour or black to match. Sold as a single unit.
This lamp post light can also be used to replace a lamp that is damaged or where the electric cable is defective. A popular choice with private developments, housing estates, communities, parks, and local authorities. This product can also be used for private driveways, small car parks, footpaths and general public areas etc.
Illumination time is up to several hours (typically dusk to dawn April to September).
Up to 3 days reserve (autonomy) power to allow for cloudy days (subject to local conditions).
Commercial grade quality.
Matt black powder coated finish.
I.P. 65 rating.
Lampshade is fitted with a removable bulb containing dozens of super bright LED's.
Light output is 500 lumens (equal to about 75w of incandescent lighting).
LED power consumption is 5 Watts.
Choice of white or warm white colour temperature.
LED's are arranged onto an E26/E27 screw-in light bulb providing an uniform 360 degree lighting pattern. The E26/E27 LED light bulb is replaceable.
LED colour temperature for white is approx. 5500k and for warm white it is approx. 3500k.
Alternative E26/E27 units (with different colour temperatures) are available by special order.
Lampshade with round base (collar) to fit an approximate 76mm (3") diameter round column.
Holes are pre-drilled in the round base (collar) of the lampshade enabling it to be secured to the column with bolts or screws.
The clear glass lampshade has 4 glass panels, each toughened and tempered.
The glass sections are 1/5" (5mm) thick
The lampshade is approximately 58cm (23") high x 46cm (18") x 46cm (18").
A 12 volt 12 Amp/Hour sealed AGM or GEL rechargeable battery is supplied and located within the top of the lampshade.
Battery is accessed by a removable panel on the top of the lampshade.
The battery has a working temperature to as low as -40 deg F (-40 deg C) and to as high as +122 deg F (+50 deg C).
A choice of 3m or 4m column is available.
Choice of root mount (direct burial) or flange mount (surface) type base.
Standard columns are root mount, galvanised steel, tubular and with a 76mm diameter top.
The root mount column is supplied with an additional 750mm to 1000mm for burial.
The flange mount column is suplied with an anchor kit and template.
Heavier duty columns of 89mm and 114mm diameter are available by special order.
Other column heights are available by special order.
Coloured painted or powder coated finishes are available by special order.
This system includes a programmable control module which regulates and manages the solar panel power, battery power, and illumination time.
The compact control module has LED indicators to display status, and houses connections for solar panel battery, and lamp.
User programmable illumination time of 1 to 12 hours or dusk-to-dawn setting (where conditions permit).
Default setting is typically dusk to dawn.
User or installer can set the control module illuminate the light for a set number of hours after sunset.
Instructions are supplied should the user or installer need to program or re-program the module*.
Three, high quality, 7 watt solar panels discretely built flush into the top of the lampshade.
One solar panel is fitted on 3 out of 4 sides.
Total solar panel wattage is 21 watts.
An auxilliary 20W solar panel kit (model SP02) is available (if required) which will enhance the charging during the winter months and during poor weather conditions.
The solar panels on the lampshade should be installed with the three solar panels facing East, South, and West.
Access panel should be faced North.
Long anchor bolts and templates are included for setting into new wet concrete.
Alternatively, the pole could be bolted to an existing concrete pad using appropriate expanding bolts (not included).
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and set facing South at about a 45-60 degree angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.
|Solar Lights Data|
|Lumen Output||500 lumens|
|Equivalent Incandescent Wattage||75 watts|
|Approximate Illumination Time||Up to several hours|
|Approximate Illumination Area||Up to 10 metres diameter|
|Column Height||3m or 4m|