Our solar 'High-Lite' street light is exclusive to Solar Illuminations. This shoe-box style system is renowned for it's high wind resistance, but additionally it's vandal resistant and highly durable stainless steel. Perfect for all kinds of applications.
This solar powered street light uses the latest LED technology to ensure optimum reliability and performance. It's all stainless steel construction sets it apart from all other solar street lights in its class. Illumination time is generally from dusk to dawn and is fully automated. The system can also be programmed to switch on at dusk and operate for a selected amount of hours. This system stores reserve power to allow for up to several days of cloudy weather. The 'shoe-box' style lampshade is fitted with 336 Cree® LED's which have a typical lifespan of approximately 100,000 hours (about 22 years). The 336 LED lamp provide approximately 2688 Lumens. The lampshade section attaches directly to the top of the pole. The 4 metre (13') pole has an integral base which can be bolted directly to a level, solid surface or with the anchor bolts supplied it can be set into a wet concrete footing. The rechargeable battery is housed within the lampshade. The 50w solar panel is built neatly into the top of the lampshade. Light output is equal to approximately 250w of conventional incandescent lighting. The lamp can be set to come on automatically at dusk and illumination until dawn or set to run for a chosen amount of hours each night (1-12 hours). All stainless steel construction and finish.
This solar powered street light is suitable for the illumination of small private roads, car parks, construction sites, pathways, loading bays, parks, public areas, communities and general open areas etc. It can be used for permanent or temporary applications.
Operating voltage is 12 v. DC.
Operating temperature -40 deg C ~ +51 deg C (-40 deg. F ~ 125 deg. F).
Special control system to prevent over-charging and over-discharging.
Illumination time is typically from dusk to dawn.
Up to 3 successive cloudy or alternating overcast days typically should not affect illumination time.
Polished stainless steel material and construction.
Fitted with 336 white Cree® LED's.
Each LED has a light output of 8 lumens and greater than 8000 mcd.
The light output is 2688 lumens (equal to about 250w of incandescent lighting).
Average light pattern will provide approximately 30 Lux.
Polarity protected circuitry.
Power consumption at 12v DC is 1.5A / 18 Watts.
LED life is typically 100,000 hours or equal to about 22 years.
No bulb changes unlike other street lights.
Removable LED circuit board with easy plug-in connections.
Stainless steel construction.
Natural stainless steel finish.
Custom colors by special order only.
One 12 volt sealed lead acid, GEL or AGM type battery is required (not included).
Battery capacity is typically 60, 65 or 70 Amp/Hour although a capacity of around 70 Amp/Hour is recommended.
The battery can be supplied as an option.
Over charge and over discharge protection system.
The battery voltage maintained at or below 14.2 v. DC maximum and at or above 11 v. DC.
Battery charge voltage is programmed to 16.9 v. DC.
This system includes a programmable control module and regulates and manages the solar panel power, battery power and illumination timer.
The compact control module has LED indicators to display status, input connections for solar panel and batteries and output connections for the lamp.
Push button programming.
Accepts and controls GEL, AGM and sealed lead acid type (VRLA) batteries.
Low voltage disconnect regulated by state of charge or voltage.
Detects daytime and night time conditions via the solar panel.
Automatic adaption to ambient temperature conditions.
Safety fetaures for short circuit and reverse polarity protection of battery and lamp inputs.
Automatic voltage recognition (12v or 24v).
Float voltage for 12v system is 13.7v dc and for 24v system is 27.4v dc.
Low voltage disconnect for 12v system is 11.4 ~ 11.9v dc or for 24v system is 22.8 ~ 23.8v dc.
Reconnect voltage for 12v system is 12.8v dc or for 24v system is 25.6v dc.
Dimensions approx. 11 cm x 10 cm x 4 cm (4" x 4" x 1.5") LxWxD.
Ambient temperature range -40 deg C ~ +50 deg C (-40 deg F ~ +122 deg F).
Protection rating I.P.22
Programmable lock-out feature for optional use to prevent accidental or unauthorised tampering.
User programmable illumination time of up to 1 to 12 hours or dusk-to-dawn setting (where conditions permit).
Default setting is typically dusk to dawn.
User or installer can set the control module to run from dusk and then shut off after a certain amount of hours.
For example from dusk for 4 hours then switch off, or run from dusk for 6 hours then switch off.
Instructions are supplied should the user or installer need to program or re-program the module*.
Highly efficient polycrystalline solar panel.
Stainless steel frame with anti-aging and encapsulated.
The solar panel is built into the top of the lamp head unit.
Low reflecting tempered glass.
Solar panel is 50 Watts.
Solar panel typical voltage is 17v DC at 2.9A.
Typical solar panel life is approximately 20-25 years subject to environmental factors.
Stainless steel pole with base unit to enable secure installation.
Fixing bolts for surface mounting are not included.
Anchor bolts and templates are supplied for installation into a wet concrete footing.
Pole height is 4 metres (13').
Custom height pole by special order only.
Natural stainless steel finish.
Approximate Lux distribution:
At the base of the 4 Metre (13') pole, 1 metre forward = 55 Lux.
2 metres forward =49 Lux, 3 metres forward =32 Lux, 4 metres forward =19 Lux, 5 metres forward =13 Lux, 6 metres forward =9 Lux, 7 metres forward =4 Lux.
At the base of the 13' (4 Metre) pole, 1 metre to the left or 1 metre to the right = 50 Lux.
2 metres left/right =28 Lux, 3 metres left/right =12 Lux, 4 metres left/right =7 Lux, 5 metres left/right =4 Lux, 6 metres left/right =3 Lux, 7 metres left/right =2 Lux.
55 Lux (Lumens per square metre) at the base of pole.
One square metre is approximately 3' 3" x 3' 3" or approximately 1521 square inches of area.
For every 1 metre (3' 3") the Lux is 49, 32, 19, 13, 9 & 4 respectively.
At approximately 7 metres (23'), central to the pole, there is 4 Lux at the ground.
For every 1 metre (3' 3") the Lux is 50, 28, 12, 7, 4, 3 & 2 respectively, to the immediate left and immediate right side of the pole.
At approximately 7 metres (23'), to the direct left and direct right side of the pole, there is 2 Lux at the ground.
Connection wiring between the battery box, solar panel and lamp unit is included.
Installation guide included.
Upon curbside delivery, installation is entirely at the risk of the customer and/or the customer's appointed installer.
Service & Maintenance
Service & maintenance is entirely at the risk of the customer and/or the customer's appointed servicer/maintainer.
Generally, Solar Illuminations, carries all necessary spare parts to allow the servicing and maintenance of this product for the foreseeable future.
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and set facing South at about a 45-60 degree angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.
|Solar Lights Data|
|Lumen Output||2688 lumens|
|Equivalent Incandescent Wattage||250 watts|
|Approximate Illumination Time||Typically dusk to dawn|
|Approximate Illumination Area||Up to about 15m x 15m|
|Solar Panel Wattage||50 watt|
|Battery Included||No (available as an option)|
|Column Height||4 metres|