This solar street light can be supplied with your choice of LED power. Luminaire power ranges from 30W up to 150W, an appropriate sized power system will be supplied with the system. This state-of-the-art lighting system is ideal for streets, car parks, open areas, public areas etc. Choice of column heights. Priced from £3299.99.
This powerful area light is supplied with a choice of a 30W, 60W, 80W, 100W, 120W or 150W LED luminaire capable of producing from 3,400 Lumens up to as much as 12,450 Lumens. The ETL listed luminaire is fitted with multiple, modular, high output Cree® X-TE LEDs. It can be supplied with a Type I, II, III, IV or V lighting distribution pattern. Luminaire power and illumination time can be selected based on customer requirements. The low profile lampshade unit can be attached to a support arm that fixes to a column, or attached to the top of a light column as a shoebox style fitting. Light columns are available in 4m, 5m, or 6m tall depending on your preference. The system is supplied with a metal lockable battery enclosure, which depending on battery choice, can be installed on the column or at the bottom of the column. The battery enclosure houses two large 12 Volt AGM rechargeable batteries (not included) and the MPPT Control Module. Solar Panel power and battery capacity depends on the lamp type selected, the installation location, and operation preferences. We offer a range of solar panel options from 100W up to 500W total. The solar panels can be mounted on the top of the column or directly onto the side of the column depending upon the light fitting position. The system is controlled by a highly sophisticated programmable MPPT charge controller. The light will turn on automatically at sunset and will run until dawn or will stay illuminated for a set amount of time. The light operation can be customized to suite a variety of applications. Common options include dusk to dawn (subject to model selected), or operations for a set number of hours after sunset (from 1 to 12 hours) then turn off (or dim*) with the option of switching back on for a chosen amount of hours before dawn. *Optional dimming is also available which allows the light output to be reduced by a fraction instead of completely turned off during the middle of the night. Standard colour of light fitting is black. Custom paint colours and custom LED colours available by special order only. Standard colour of light output is white. Please consult our engineers for specific component recommendations.
It is perfect for lighting up streets, footpaths, parks, open areas, playgrounds, public areas, car parks, private communities and developments, housing estates, entrances and such like. It can be used for residential or commercial applications.
Manufactured in an ISO9001:2008 'Quality Assured' facility.
Power consumption is 30, 60, 80, 100, 120 or 150 Watts (subject to model selected).
Illumination period will be designed to meet specific requirements.
Includes up to 3 days of autonomy, subject to battery capacity selected.
Supplied with a single lampshade unit.
Low profile design with minimal wind resistance.
The lamp is configured with a single LED module.
The LED module contains 48 powerful Cree® X-TE LEDs.
Can be supplied with a Type I, II, III, IV or V lighting distribution pattern.
Choice of LED colour temperature (yellow, warm white or white). White is standard.
Yellow is approx. 2,700k.
Warm white is approx. 4,000k.
White is approx. 6,500k.
Lumen tolerance +/- 5%.
The 30 Watt lamp unit provides approx. 3,400 Lumens of light output (with white LEDs).
The 60 Watt lamp unit provides approx. 8,080 Lumens of light output (with white LEDs).
The 80 Watt lamp unit provides approx. 9,500 Lumens of light output (with white LEDs).
The 100 Watt lamp unit provides approx. 11,875 Lumens of light output (with white LEDs).
The 120 Watt lamp unit provides approx. 14,250 Lumens of light output (with white LEDs).
The 150 Watt lamp unit provides approx. 17,700 Lumens of light output (with white LEDs).
LED life is typically up to 100,000 hours or equal to about 22 years.
Luminaire attaches to the lamp support arm which in turn attaches to the column.
Painted aluminium construction with TIR optics.
Black colour anti-static powder coated finish.
Grey, silver and custom colours by special order only.
Stainless steel hardware.
IP66 weather rating.
Full cutoff light fitting as specified by IESNA or IES standards.
Dark sky compliant light fitting.
CRI is >75
LEDs are powered by Mean Well, with integrated PWM Dimming control and multi-driver redundancy.
The light incorporates a high efficiency 18V-32V DC Mean Well LED driver.
The LED driver has short circuit, over current, over voltage and over temperature protection.
Tenon internal diameter is approx. 6cm (2.4").
Unique adjustable tenon allows vertical adjustments from 0-180 degrees.
Certifications, listings and approvals: CE, FCC, RoHS, CB, TUV, CCC, CQC, cULus, ETL, DLC, cETLus, Designlights Consortium, LM79, LM80.
The luminaire is approx. 40cm x 40cm x 22cm (16" x 16" x 9") LxWxD.
The 30W, 60W and 80W light fitting weighs approx. 8.5 kgs (18 lbs).
The 100W, 120W and 150W light fitting weighs approx. 9 kgs (20 lbs).
A choice of 4m, 5m or 6m column is available.
Choice of root mount (direct burial) or flange mount (surface) type base.
Standard columns are galvanised steel, tubular and with a 76mm diameter top.
The root mount column is supplied with an additional 750mm to 1000mm for burial.
The flange mount column is suplied with an anchor kit and template.
Heavier duty columns of 89mm and 114mm diameter are available by special order.
Other column heights are available by special order.
Coloured painted or powder coated finishes are available by special order.
A galvanized steel support arm is included which allows the lampshade to attach to the column.
Grey colour finish.
Bespoke colours by special order only.
Two 12 volt 32, 55, 88, 110, 125, 180, or 225 Amp-Hour sealed lead acid, AGM or GEL type rechargeable batteries are required (not included).
Battery capacity is determined by the system specifications, geographic location and site requirements.
Batteries are available as an option.
A galvanized steel battery box is included and accommodates the rechargeable batteries.
Lockable (padlock not included).
The battery box is usually installed at the base of the column.
Grey colour finish.
Bespoke colours by special order only.
A polycrystalline solar panel is included.
The solar panel wattage will be between 180W and 500W and is determined by the power consumption of the luminaire and the illumination time required.
Alternative solar panel wattages are available and may be required due to system specifications, geographic location and site requirements.
Aluminum frame with anti-aging and encapsulated.
Low reflecting tempered glass.
Solar panels are may be supplied in a dual format (2 x 100w = 200w) or in single format (1 x 200w).
Typical solar panel life is approximately 20-25 years subject to environmental factors.
The dimensions of the solar panel can vary and is subject to the wattage and format supplied.
The solar panel(s) are supplied with steel support frame and T bar mounting system with tenon that allows direct attachment to the top of the column.
The mounting system allows the solar panel(s) to be tilted to an appropriate angle determined by the geographic location of the installation site.
The solar panel(s) can be rotated (ideally to a Southerly unobstructed view of the sky).
Supplied with a MPPT charge controller which automatically controls the solar panel power, battery charging and lighting function and operation.
Ultra fast Maximum Power Point Tracking (MPPT).
The MPPT charge controller is typically 30% more efficient than standard PWM controllers and 10% more efficient to most other MPPT controllers.
Additional efficiency for cloudy weather and during times of reduced sun radiation.
This controller features the very latest smart technology.
Provides extended battery life and extra protection against excessive battery discharge and overcharge.
Battery life algorithm operates 24/7.
Low voltage detection for automatic disconnect.
Continuous environment, input and output power management.
The controller is sized to the system specifications with 10A and 15A versions available (subject to solar panel wattage and battery capacity).
Pre-programmed software for load output, dusk to dawn lighting, single timed lighting, dual timed lighting, dimming option and the ability of interfacing with motion detection, where required.
This MPPT charge controller is programmed by Solar Illuminations as per your requirements and system ability.
Lighting control features illumination from dusk to dawn (where applicable), or on at dusk for X amount of hours then off, or on at dusk for X amount of hours, then off, then back on again for X amount of hours before dawn.
Dimming option (where applicable) allows the lighting to dim at any time during the illumination time.
The dimming option or any other illumination mode can be used in conjunction with motion activation (where applicable).
Dimming may be at any percentage from 1-99%.
Supports real time data monitoring (iPhone, Andriod, Mac or PC) with optional interface and/or Bluetooth dongle.
Battery voltage 12/24V dc auto select.
Rated charge current 10A/15A.
Maximum PV power (12V dc) is 135W at 10A and 200W at 15A.
Maximum PV power (24V dc) is 270W at 10A and 400W at 15A.
Maximum PV open circuit is 75V dc.
Peak efficiency is 98%.
Charge voltage (absorption) is 14.4V dc.
Charge voltage (float) is 18.8V dc.
Multi stage adaptive charge algorithm.
Automatic temperature compensation.
Low voltage load disconnect at 11.1V dc to 11.8V dc (12v dc system) or 22.2V dc to 23.6V dc (24V dc system) or battery life algorithm.
Low voltage load reconnect at 13.1V dc to 14V dc (12V dc system) or 26.2V dc to 28V dc (24V dc system).
Protection feature includes battery reverse polarity (fuse), output short circuit and over temperature.
Operating temperature is -30 deg. C (-22 deg. F) to +60 deg. C (140 deg. F).
Humidity up to 95%, non condensing.
Power terminals are AWG 10 (6mm2).
Protection rating IP22 (connection terminal area).
Weight is 500g (1.1 Lbs).
Dimensions are approx. 10cm x 10cm x 4cm (4” x 4” x1.5”).
Please note: Upon installation and power-up the controller goes into a 7 day evaluation mode where smart monitoring and configurations commence. Additional evaluation with self-managing adjustments may continue for up to 7 more days. This is all part of the smart feature that enables this intelligent controller to understand its use, the application, the surrounding environment and the current conditions. During this time some of its programmed features may differ temporarily. This is a perfectly normal process and must be accepted during that time. During this time the controller will adjust to the current condition and charge status of the batteries. It is therefore recommended that all batteries are 100% fully charged before connection using an appropriate battery charger. This may significantly reduce the evaluation mode time of 7+7 days to much less. The solar panel(s) should be connected to the MPPT charge controller first, followed by the fully charged batteries.
Connection wiring between the battery box, solar panel and lamp unit is included.
Installation guide included.
Upon curbside delivery, installation is entirely at the risk of the customer and/or the customer's appointed installer.
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and set facing South at about a 45-60 degree angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.
|Solar Lights Data|
|Lumen Output||Up to 17,700 Lumens.|
|Equivalent Incandescent Wattage||Up to approx. 500 Watts.|
|Approximate Illumination Time||Up to dusk to dawn.|
|Approximate Illumination Area||Up to approx. 50m x 30m.|
|Solar Panel Wattage||From 180 Watts.|
|Battery Included||No (available as an option).|
|Column Height||Up to 6m.|