This solar powered street light / area light offers a more traditional style. It is supplied with a lockable battery box in the base of the column. Easy to install and ideal for a wide range of area lighting applications. A choice of lamp configurations is offered. Priced from £1999.99.
This solar powered solar street light uses the latest LED technology to ensure optimum reliability and performance. We offer several options for the lamp power, solar panel wattage, and battery capacity. Your selection will be dependent upon the lamp power you desire, and how you expect the light to perform. We can size a system to illuminate dusk to dawn throughout the year, or allow for up to a certain amount of hours of illumination. For assistance on determining what options will be necessary for your application, please contact our sales team. LED bulb choices are 10W (1000 Lumens), 12W (1200 Lumens), 15W (1500 Lumens) or 18W (1800 Lumens). The lampshade allows different LED bulbs to be installed into its Edison (E26/E27) screw-in bulb holder. A heavy duty, lockable battery box is supplied to facilitate the rechargeable batteries (not included). The 4 metre (13') column attaches to the top of the battery box so the pole and box appear as one unit standing almost 5 metres (16') tall with the solar panel attached. A solar panel is supplied ranging from 45 Watts to 100 Watts, dependent upon light option selected and illumination time desired. The solar panel attaches to the top of the column and comes with a support arm to allow for setting at the correct angle and direction. The system is supplied with a pre-programmed MPPT charge controller which uses the very latest smart technology. The controller can be programmed so that the light will come on automatically at sunset and illuminate until dawn. In the winter this can be as much as 16 hours illumination time. The MPPT controller offers many choices and is programmed to operate the light as per your requirements. Please call us to discuss all the options that are available. The following examples are just some of the options available. It can be set to run dusk to dawn, or run as a single timed mode for a X amount of hours after sunset (from 1 to 16 hours). It can also be programmed to run in a dual timed mode so that it automatically comes on for X amount of hours after sunset, switches the light off, then switches it back on again for X amount of hours before sunrise. Optional motion sensing (with one or more PIR detectors) is also available, if required. Colour of product and light fitting is black. Colour of light output is white.
It is perfect for lighting up small streets, footpaths, parks, open areas, playgrounds, public areas, small car parks, private communities and developments, housing estates, entrances and such like. It can be used for residential or commercial applications. Having a more traditional style makes this a popular choice for many.
Manufactured in an ISO9001:2008 'Quality Assured' facility.
Illumination time is typically dusk to dawn (subject to the lamp and solar panel configuration selected).
Operating voltage is 24V. DC.
Edison bulb holder will accept E26/E27 12 volt LED bulb.
Accepts 10W, 12W, 15W, 18W PAR style LED bulb (or any variation between by special order).
The 10W LED lamp provides 1000 Lumens, the 12W provides 1200 Lumens, the 15W provides 1500 Lumens and the 18W provides 1800 Lumens.
All LEDs bulbs are white at approx. 5500-6000k colour temperature. Warm white, cool white and other colour temperatures are available by special order.
LED bulb life is typically up to 100,000 hours or up to about 22 years.
Two 12 Volt 18 Amp-Hr, or 34 Amp-Hr sealed lead acid batteries are required.
Larger capacity battery options may be available. For help determining whether a larger battery is necessary, please contact our customer service department.
24 Volt dc system.
Batteries must be connected together in series.
A painted galvanized steel arm is supplied to accommodate the lampshade.
Attaches to the street light column.
Satin black colour finish.
Bespoke colours by special order only.
A galvanized steel column is supplied which attaches to the top of the battery box cabinet.
The column surface has a turned (fluted) rib design.
The column has a square flat base (flat plate) with pre-drilled holes for bolting directly to the battery box cabinet.
Fixing bolts are included.
Wind load rating for pole is 110 MPH with a 1.3 gust factor.
Pole height is approx. 4 metres (13'). Custom height pole by special order only.
Pole attaches to battery box cabinet and solar panel support frame attaches to top of pole. Therefore total height of pole is approx. 5 metres (16') when assembled.
Satin black colour finish.
Bespoke colours by special order only.
Galvanized steel lockable battery box will accommodate the rechargeable battery. Padlock not included
Pre-drilled holes in the battery box cabinet base enable secure installation.
The column attaches to the top of the battery box and with therefore increase the total height of the column by approximately 50cm (16").
Satin black colour finish. Custom colours by special order only.
Battery box is approx. 35cm x 35cm x 50cm (14" x 14" x 16") LxWxH.
Two templates for setting the fixing bolts into new, wet concrete are included.
The templates for aligning the anchors are approx. 320mm x 320mm (12.5" x 12.5").
The bolt pattern (diagonal distance from one hole center to another) is approx. 323mm (12.75").
The 4 pre-drilled holes on each template are approx. 20mm (3/4") diameter.
A highly efficient 45 Watt, 70 Watt, 90 Watt or 100 Watt polycrystalline solar panel is included.
Higher powered solar panel options may be available. For help determining whether a solar panel upgrade is necessary, please contact our customer service department.
Aluminum frame with anti-aging and encapsulated.
Low reflecting tempered glass.
The solar panel is supplied with a support frame and hardware to attach to the top of the column.
Typical solar panel life is approximately 20-25 years subject to environmental factors.
The geographic location of the street light may affect the size/wattage of the solar panel required.
Supplied with a MPPT charge controller which automatically controls the solar panel power, battery charging and lighting function and operation.
Ultra fast Maximum Power Point Tracking (MPPT).
The MPPT charge controller is typically 30% more efficient than standard PWM controllers and 10% more efficient to most other MPPT controllers.
Additional efficiency for cloudy weather and during times of reduced sun radiation.
This controller features the very latest smart technology.
Provides extended battery life and extra protection against excessive battery discharge and overcharge.
Battery life algorithm operates 24/7.
Low voltage detection for automatic disconnect.
Continuous environment, input and output power management.
The controller is sized to the system specifications with 10A and 15A versions available (subject to solar panel wattage and battery capacity).
Pre-programmed software for load output, dusk to dawn lighting, single timed lighting, dual timed lighting, dimming option and the ability of interfacing with motion detection, where required.
This MPPT charge controller is programmed by Solar Illuminations as per your requirements and system ability.
Lighting control features illumination from dusk to dawn (where applicable), or on at dusk for X amount of hours then off, or on at dusk for X amount of hours, then off, then back on again for X amount of hours before dawn.
Dimming option (where applicable) allows the lighting to dim at any time during the illumination time.
The dimming option or any other illumination mode can be used in conjunction with motion activation (where applicable).
Dimming may be at any percentage from 1-99%.
Supports real time data monitoring (iPhone, Andriod, Mac or PC) with optional interface and/or Bluetooth dongle.
Battery voltage 12/24v dc auto select.
Rated charge current 10A/15A.
Maximum PV power (12v dc) is 135W at 10A and 200W at 15A.
Maximum PV power (24v dc) is 270W at 10A and 400W at 15A.
Maximum PV open circuit is 75v dc.
Peak efficiency is 98%.
Charge voltage (absorption) is 14.4v dc.
Charge voltage (float) is 18.8v dc.
Multi stage adaptive charge algorithm.
Automatic temperature compensation.
Low voltage load disconnect at 11.1v dc to 11.8v dc (12v dc system) or 22.2v dc to 23.6v dc (24v dc system) or battery life algorithm.
Low voltage load reconnect at 13.1v dc to 14v dc (12v dc system) or 26.2v dc to 28v dc (24v dc system).
Protection feature includes battery reverse polarity (fuse), output short circuit and over temperature.
Operating temperature is -22 deg. F (-30 deg. C) to 140 deg. F (+60 deg. C).
Humidity up to 95%, non condensing.
Power terminals are AWG 10 (6mm2).
Protection rating IP22 (connection terminal area).
Weight is 500g (1.1 Lbs).
Dimensions are approx. 4” x 4” x1.5” (10cm x 11cm x 4cm).
Please note: Upon installation and power-up the controller goes into a 7 day evaluation mode where smart monitoring and configurations commence. Additional evaluation with self-managing adjustments may continue for up to 7 more days. This is all part of the smart feature that enables this intelligent controller to understand its use, the application, the surrounding environment and the current conditions. During this time some of its programmed features may differ temporarily. This is a perfectly normal process and must be accepted during that time. During this time the controller will adjust to the current condition and charge status of the batteries. It is therefore recommended that all batteries are 100% fully charged before connection using an appropriate battery charger. This may significantly reduce the evaluation mode time of 7+7 days to much less. The solar panel(s) should be connected to the MPPT charge controller first, followed by the fully charged batteries.
Connection wiring between the battery box, solar panel and lamp unit is included.
Installation guide included.
Upon curbside delivery, installation is entirely at the risk of the customer and/or the customer's appointed installer.
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and set facing South at about a 45-60 degree angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.
|Solar Lights Data|
|Lumen Output||Up to 1800 Lumens.|
|Equivalent Incandescent Wattage||Up to approx. 200 Watts.|
|Approximate Illumination Time||Up to dusk to dawn.|
|Approximate Illumination Area||Up to 10m x 10m.|
|Solar Panel Wattage||From 45 Watts.|
|Battery Included||No (available as an option).|
|Column Height||4 metres.|