This solar powered lampshade is huge in size and is designed to fit on the top of a round lamp post or column. It has a traditional appearance and provides an excellent level of light output. It will fit directly to the top of an existing round post or pole with a diameter of about 7.5cm (3").
This lampshade fitting is a great option for those who are looking for a traditional looking, bright, long lasting light to fit onto an existing pole. It attaches to a round post or round pole up to about 76mm (3") in diameter, which makes it ideal for retro-fitting. It's one of the best retro-fit lights that we offer, and also has user programmable features. This cast aluminium solar post/pole top light is fitted with dozens of super bright LED's which never need replacing. The multiple LED's provide almost 500 Lumens with a choice of white or warm white light output. The light output is equal to about a 75w incandescent light bulb. The bulb does unscrew and is replaceable but typically last for many years. Different LED bulbs can be ordered and installed as an option. This light fitting also boasts a programmable timer control module, allowing for customizable illumination times. There are three powerful solar panels that are each built neatly and discretely into the top of the lampshade. When installed at a height of 3 or 4 metres the solar panels are barely noticeable and blend in within the design of the lampshade. The light will automatically illuminate when it gets dark, and typically illuminates for up to several hours. It has four toughened, clear, tempered glass sides. Colour of light output is white. Colour of product is black. Sold as a single unit.
This solar light can also be used to replace a lamp that is damaged or where the electric cable is defective. A popular choice with property developers and housing associations etc. This light is designed for more demanding applications such as public areas, parks, outdoor areas, car parks, communities, pedestrian zones, but could also be used for residential driveways, pathways etc.
Typically up to several hours (usually dusk to dawn illumination during Spring to Autumn).
Up to 3 days reserve (autonomy) power to allow for cloudy days (subject to local conditions).
All aluminium construction.
Commercial grade quality.
Matt black powder coated finish.
Lampshade with round base (collar) to fit a round post or round pole of no more than 7.5cm (3") diameter (O.D.).
For use with an existing round post or column.
I.P. 65 rating.
The lampshade has 4 glass panels, each toughened and tempered.
The glass sections are 5mm (1/5") thick.
The internal diameter (ID) of the round base (collar) of this fixture is approximately 78mm (3 1/10").
This fitting does not include a post or column.
The blub is fitted with dozens of LED's which provide a choice of white or warm white illumination color.
LED's are arranged onto an E26/E27 screw-in bulb unit providing a uniform 360 degree lighting pattern.
LED colour temperature for white is approx. 5500k and for warm white it is 3500k.
Alternative LED bulbs (with different colour temperatures) are available.
500 Lumens total output.
LED power consumption is 5 Watts.
Equivalent to a conventional (incandescent) 75 watt light bulb.
Alternative E26/E27 LED bulbs can be supplied with different Lumen outputs.
This fitting is approximately 58cm (23") high x 46cm (18") x 46cm (18").
Weight of complete product is approximately 25 Kgs (55 lbs).
Electronic circuit board (PCB) is housed within the top of the lampshade.
All PCB connections are plug & play.
Control module can be programmed to run the light dusk till dawn, or for a set number of hours after sunset (1-12).
A 12 volt 12 Amp/Hour sealed AGM or GEL rechargeable battery is supplied and located within the top of the lampshade.
Battery life is approx. 3-5 years.
The battery has a working temperature to as low as -40 deg C (-40 deg F) and to as high as +50 deg C (+122 deg F).
Higher specification battery of the same voltage and ampage can be used, for more extreme environments, or where required.
Three, high quality, 7 watt solar panels discretely built flush into the top of the lampshade.
One solar panel is fitted on 3 out of 4 sides.
Total solar panel wattage is 21 watts.
An auxilliary 20W solar panel kit (model SP02) is available (if required) which will enhance the charging during the winter months and during poor weather conditions.
Lamp should be positioned so that the three solar panels East, South, and West.
Access panel should be positioned to face North.
The lampshade simply slides over the top of an existing pole or post.
Holes are pre-drilled in the round base (collar).
Simply screw or bolt through the round base into your existing pole (screws not included)
Installation should take only a few minutes.
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and set facing South at about a 45-60 degree angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.
|Solar Lights Data|
|Lumen Output||500 lumens|
|Equivalent Incandescent Wattage||75 watts|
|Approximate Illumination Time||Up to several hours|
|Approximate Illumination Area||Up to about 12m diameter|