This solar powered street light offers a more traditional style with twin lampshades. It is supplied with solar panel, MPPT chagre controller, and a lockable battery box in the base of the column. Easy to install and ideal for a wide range of area lighting applications.
This traditional style solar powered street light is fitted with the latest LED technology to ensure optimum reliability and performance. The system is supplied with a 100 Watt solar panel, and two 10 Watt (1000 Lumen) PAR bulbs, one in each lampshade. The LED PAR bulb produces a more directional downward beam pattern. This light will illuminate dusk to dawn for most of the year, and up to 5 hours in the winter months. The lamp is supplied with a heavy duty, lockable battery box to facilitate the rechargeable batteries, and supplied MPPT charge controller. The charge controller can be programmed to illuminate from dusk to dawn, turn off after a certain amount of hours, or it can use a dual timer option. The dual timer allows the light to activate at dusk and illuminate for X hours, switch off, and then turn back on for X hours prior to sunrise. The 4 metre (13') column attaches to the top of the battery box so the pole and box appear as one unit standing almost 5 metres (16') tall with the solar panel attached. The solar panel attaches to the top of the column by using the supplied adjustable support arm, which allows for setting at the correct angle and direction. Colour of light fitting is black. Colour of light output is white.
It is perfect for lighting up small streets, footpaths, parks, open areas, playgrounds, public areas, small car parks, private communities and developments, housing estates, entrances and such like. It can be used for residential or commercial applications. Having a more traditional style makes this a popular choice for many.
Manufactured in an ISO9001:2008 'Quality Assured' facility.
Illumination time is typically dusk to dawn.
Up to 3 days autonomy (reserve power) to allow for successive cloudy weather and days without sunshine.
Edison bulb holder will accept E26/E27 12 volt LED bulb (typically a corn or PAR style bulb).
Supplied with two 10W PAR bulb which provide 1000 Lumens.
All LEDs are white at approx. 5500-6000k colour temperature. Warm white, cool white and other LED colour temperatures are available by special order.
LED bulb life is typically up to 100,000 hours or up to about 22 years.
Two 12V 32 Amp-Hour batteries are required (not included).
Typical battery life is approximately 3-5 years subject to environmental factors and the battery manufacturer's quality and design.
24V dc system.
Batteries are to be connected in series.
Galvanized steel painted arms to accommodate the lampshades.
Attaches to the street light column.
Satin black colour finish.
Bespoke colours by special order only.
A galvanized steel column is included which attaches to the top of the battery box cabinet.
The column surface has a turned (fluted) rib design.
The column has a square flat base with pre-drilled holes for bolting directly to the battery box cabinet.
Fixing bolts are included.
Wind load rating for pole is 110 MPH with a 1.3 gust factor.
Column height is approx. 4 metres (13'). Alternative column heights are available by special order only.
The column attaches to the battery box cabinet and solar panel support frame attaches to top of column.
Therefore total height of column is approx. 5 metres (16') when assembled.
Satin black colour finish.
Bespoke colours by special order only.
Galvanized steel lockable battery box will accommodate the rechargeable battery. Padlock not included
Pre-drilled holes in the battery box cabinet base enable secure installation.
The pole attaches to the top of the battery box and with therefore increase the total height of the pole by approximately 50cm (16").
Satin black colour finish. Bespoke colours by special order only.
Battery box is approx. 35cm x 35cm x 50cm (14" x 14" x 16") LxWxH.
Two templates for setting the fixing bolts into new, wet concrete are included.
The templates for aligning the anchors are approx. 320mm x 320mm (12.5" x 12.5").
The bolt pattern (diagonal distance from one hole center to another) is approx. 323mm (12.75").
The 4 pre-drilled holes on each template are approx. 20mm (3/4") diameter.
A 100 Watt polycrystalline solar panel is included.
Aluminum frame with anti-aging and encapsulated.
Low reflecting tempered glass.
Typical solar panel life is approximately 20-25 years subject to environmental factors.
100W solar panel dimensions are approx. 121.6cm x 67.1cm x 3.5cm (47.87" x 26.43" x 1.5") LxWxD.
Supplied with a MPPT charge controller which automatically controls the solar panel power, battery charging and lighting function and operation.
Ultra fast Maximum Power Point Tracking (MPPT).
The MPPT charge controller is typically 30% more efficient than standard PWM controllers and 10% more efficient to most other MPPT controllers.
Additional efficiency for cloudy weather and during times of reduced sun radiation.
This controller features the very latest smart technology.
Provides extended battery life and extra protection against excessive battery discharge and overcharge.
Battery life algorithm operates 24/7.
Low voltage detection for automatic disconnect.
Continuous environment, input and output power management.
The controller is sized to the system specifications with 10A and 15A versions available (subject to solar panel wattage and battery capacity).
Pre-programmed software for load output, dusk to dawn lighting, single timed lighting, dual timed lighting, dimming option and the ability of interfacing with motion detection, where required.
This MPPT charge controller is programmed by Solar Illuminations as per your requirements and system ability.
Lighting control features illumination from dusk to dawn (where applicable), or on at dusk for X amount of hours then off, or on at dusk for X amount of hours, then off, then back on again for X amount of hours before dawn.
Dimming option (where applicable) allows the lighting to dim at any time during the illumination time.
The dimming option or any other illumination mode can be used in conjunction with motion activation (where applicable).
Dimming may be at any percentage from 1-99%.
Supports real time data monitoring (iPhone, Andriod, Mac or PC) with optional interface and/or Bluetooth dongle.
Battery voltage 12/24V dc auto select.
Rated charge current 10A/15A.
Maximum PV power (12V dc) is 135W at 10A and 200W at 15A.
Maximum PV power (24V dc) is 270W at 10A and 400W at 15A.
Maximum PV open circuit is 75V dc.
Peak efficiency is 98%.
Charge voltage (absorption) is 14.4V dc.
Charge voltage (float) is 18.8V dc.
Multi stage adaptive charge algorithm.
Automatic temperature compensation.
Low voltage load disconnect at 11.1V dc to 11.8V dc (12v dc system) or 22.2V dc to 23.6V dc (24V dc system) or battery life algorithm.
Low voltage load reconnect at 13.1V dc to 14V dc (12V dc system) or 26.2V dc to 28V dc (24V dc system).
Protection feature includes battery reverse polarity (fuse), output short circuit and over temperature.
Operating temperature is -30 deg. C (-22 deg. F) to +60 deg. C (140 deg. F).
Humidity up to 95%, non condensing.
Power terminals are AWG 10 (6mm2).
Protection rating IP22 (connection terminal area).
Weight is 500g (1.1 Lbs).
Dimensions are approx. 10cm x 10cm x 4cm (4” x 4” x1.5”).
Please note: Upon installation and power-up the controller goes into a 7 day evaluation mode where smart monitoring and configurations commence. Additional evaluation with self-managing adjustments may continue for up to 7 more days. This is all part of the smart feature that enables this intelligent controller to understand its use, the application, the surrounding environment and the current conditions. During this time some of its programmed features may differ temporarily. This is a perfectly normal process and must be accepted during that time. During this time the controller will adjust to the current condition and charge status of the batteries. It is therefore recommended that all batteries are 100% fully charged before connection using an appropriate battery charger. This may significantly reduce the evaluation mode time of 7+7 days to much less. The solar panel(s) should be connected to the MPPT charge controller first, followed by the fully charged batteries.
Connection wiring between the battery box, solar panel and lamp unit is included.
Installation guide included.
Upon curbside delivery, installation is entirely at the risk of the customer and/or the customer's appointed installer.
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and set facing South at about a 45-60 degree angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.
|Solar Lights Data|
|Lumen Output||1000 Lumens.|
|Equivalent Incandescent Wattage||Approx. 350 Watts.|
|Approximate Illumination Time||Typically dusk to dawn for most of the year.|
|Approximate Illumination Area||Up to approx. 20m x 10m.|
|Solar Panel Wattage||100 Watts.|
|Battery Included||No (available as an option).|
|Column Height||4 metres.|