Available in black or grey. This all-in-one, integrated, solar 5W-20W area light fitting is designed to mount onto an existing light column of 76mm diameter. It is ideal for general area lighting. This luminaire is fitted with multiple, super bright, white LEDs which provide up to 2,600 Lumens in full brightness mode. This is a fully programmable system with a choice of five different operating modes and options.
This unique, compact, commercial grade, solar powered light can be quickly and easily installed to the top of an existing round column. It will automatically illuminate at dusk and has different lighting modes that can be set-up and programmed. It is a very flexible system that can be set and programmed to operate in many different ways and meet the criteria for almost any application. The system can operate using one or more of the five modes, allowing LED power at full brightness or dimmed to specific percentages and for chosen durations. LED power is adjustable from 5W to 20W (650 to 2,600 lumens). So, you can choose exactly how many hours you want the lighting to operate and the brightness levels. This luminaire features a built-in 35W solar panel and a pre-installed lithium battery pack. It's made of die-cast aluminum. The lighting distribution is 360 degrees and you can also choose (via a switch) the colour temperature of the LEDs. 3000k (warm white) or 6000k (cool white). Colour of product is black. Colour of light output is white. Sold as a single unit.
Ideal as a new install or retro-fit. Perfect for small car parks, driveways, parks, footpaths, playgrounds, multi-use sports areas (MUGA), public spaces, and general open areas, etc.
Unique, integrated, all-in-one lighting system.
Die-cast aluminium construction with LED optics.
Built-in MPPT charge controller with intelligent control.
Programmed to operate as per end-user requirements.
Several different options, modes and features can be set-up with this system to meet end-user requirements.
The luminaire can be programmed to provide a choice of different lumen outputs from 650 to 2,600 lumens.
Up to 5 modes can be programmed and applied to any of the illumination times and outputs mentioned below.
You can select whether you want to use 1, 2, 3, 4 or 5 different lighting modes.
Each mode can be set to operate for a specific amount of time during the night and for different durations.
For example, the light can come on at dusk as mode 1, for x amount of hours, at x percentage of brightness, then in the mode 2 operate for x amount of hours, at x percentage of brightness, etc.
The illumination time for 100% full brightness lighting is adjustable.
The illumination output is adjustable from 1% to 100%.
There are limitations based on the geographic location of the installation site and the specifications of this luminaire, so the end-user requirements must be reasonable and within scope.
Choice of LED power from 5W to 20W.
Choice of 3000k (warm white) or 6000k (cool white) LED colour temperature (using the switch on the underside of the luminaire)
High output Osram 3030 LEDs providing 200lm/W.
The light output can be adjusted to provide any lumen output from 650 lumens to 2,600 lumens.
Based on 100% full brightness the lumen output is shown below, for each LED power option.
At 5W the light output will be 650 lumens.
At 10W the light output will be 1,300 lumens.
At 15W the light output will be 1,850 lumens.
At 20W the light output will be 2,600 lumens.
Features a small illuminated LCD battery display screen to show current battery status at any time.
IES file available upon request.
IP65 weather rating.
Temperature range is -20 deg C (-4 deg F) to +80 deg C (+176 deg F).
LED colour temperature choice is 3000k to 6500k.
Standard coloured finish is black.
Other colours by special order.
Certifications include CE, IEC, TUV, IESNA, RoHS, LM-79 and LM-80.
Manufactured in an ISO9001 quality assured facility.
Dimensions are approx. 56cm (22") diameter x 21cm (8") high.
Designed to attach to the top of a suitable column (ideally 76mm (3") O.D.
A column is not included.
Select model PO30 if you require this product with a choice of 3M, 4M, 5M or 6M column.
Use a tenon or spigot (not included) if you wish to attach this to a column bigger or smaller than 76mm (3") O.D.
Supplied with a pre-installed lithium (LIFEPO4) battery.
Typical lifespan is over 10 years and is replaceable.
Integrated MPPT charge controller.
Battery management system (BMS) feature.
Over-load, over current, over temperature, over voltage, over charge and over discharge monitoring and protection.
The battery voltage is 12.8V DC and 240W/hr capacity.
High quality, integrated 35W monocrystalline solar panel.
Grade A rated with tempered glass.
Solar panel voltage is 18V DC.
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and set facing South at about a 45-60 degree angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.