This heavy duty clamp attachment kit was designed by us through popular demand. It enables our FL05, FL06, FL09 and FL10 light fittings to attach directly to a round pole and still allows the lampshade to be adjusted to the desired angle.
This kit consists of a heavy duty steel bracket which is suitable for fixing to a vertical or horizontal surface or to a round pole or round post. It can also be used to fix to a square post or pole with suitable mounting footprint. Once secured, this bracket will enable either our FL05, FL06, FL09 and FL10 lamps to attach to it. If you intend to use this bracket to attach one of our light fittings to a round pole, it willl fit a pole up to approximately 9 cm (3.5") diameter. Easy to install. The bracket is supplied with two adjustable banding pieces that attach it to the pole. Simply wrap the banding around the pole, and through the bracket and tighten the banding for a secure fit. If you have a pole of larger diameter, this clamp can still be used but surface mounted directly to the pole and screwed or bolted into place. For installation to a vertical or horizontal surface simply discard the banding and screw or bolt the flat side of the mounting plate to your surface, or using larger banding. Colour of clamp is grey.
Used to mount light fittings on a pole with a diameter up to 9cm (3.5”). Clamp can be used for FL05, FL06 light fittings, and also 144 LED, 288 LED, and 504 LED lamps.
Manufactured in an ISO9001:2008 'Quality Assured' facility.
Steel clamp attachment kit for FL05, FL06 light fittings, and also 144 LED, 288 LED, and 504 LED lamps.
Grey painted finish.
Easy to install.
Fits almost any round pole or round post up to approx 8cm (3.5") diameter.
Simply clamps and locks around a pole or post.
Without the banding pieces it can be fixed to almost any flat surface (horizontal or vertical).
Can be attached to a square sided post.
Can be attached to a larger diameter pole or post directly, by removing the banding and direct surface mounting, or by using larger banding.
Light fitting mount is on T-bar section and has universal mounting points to accommodate our FL05, FL06, and 144, 288, 504 LED lamps.
Length of the support arm is approx. 43cm (17").
Nuts, bolts, and washers included for standard installation.
Minor errors & omissions must be accepted. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.