Menu
Your Cart
Open 24 hours | Telephone - London: 020 7873 2262

RC12 PIR Motion Detector / Sensor

RC12 PIR Motion Detector / Sensor
RC12 PIR Motion Detector / Sensor
£129.99

This high quality, weatherproof, commercial grade, digital motion detector is designed to be integrated into many of our professional, commercial grade lighting system. It's a 12V DC sensor which features a fully adjustable detection range from 10M up to 35M (over 1,000 square metres). It detection area of 90 degrees, 30M x 35M max. It has several unique features including customised optics, user/installer programming, temperature compensation, and an adjustable pulse count (sensitivity) setting, etc. This professional,  passive infra-red detector is designed for use with a solar energy system only (low voltage).

Technical Specifications
 

Specifications
Professional, commercial grade PIR (passive infra-red) motion detector.
Features a single, dual element pyro-electric passive infra-red sensor (two sensors built into one, to help eliminate false detections).
Detection area adjustable from 10M to 35M (33' to 114').
Detection coverage is up to  1,050 square metres (about 11,000 square feet).
Coverage is 90 degrees 35M x 30M (114' x 97') maximum.
Fresnel Lens with 36 zones and white light filter.
Dual axis allows lens adjustment up to 180 degrees pan and up to 90 degrees tilt.
Lens sections can be masked (if required) with masking foil supplied.
Customised optics with double silicon shielded dual element (50,000 Lux reduction ability)
UV stabilized translucent outer cover.
Four solid state outputs available.
Output No. 1 is a voltage free relay with timer, selectable normally open/closed, rated to 24v dc @ 50mA, relay timer period adjustable from 04. to 60 seconds.
Output No. 2 is a voltage free relay with timer, selectable normally open/closed, rated to 24v dc @ 50mA, relay timer period adjustable from 2 to 60 seconds.
Output No. 3 is open collector negative switching, 25mA max, relay timer period is 400ms.
Output No. 4 is open collector negative switching, 25mA max, relay timer period is +60 seconds, adjustable Lux settings from 2 Lux (dusk) to 24 hour (day).
Power input is 9 to 15V DC.
Current is 10mA (at 12V DC nominal)
Pulse count (sensitivity) is adjustable from 1-4 (2-4 from previous detection , 6 seconds).
Anti-tamper switch with optional and programmable output.
Automatic temperature compensation with digital sensitivity adjustment.
Digital ASIC/microprocessor control with non volatile memory.
Walk test option with LED indication.
Typical operating temperature is -4 deg. F to 131 deg. F (-20 deg. C to 55 deg. C).
Conformally coated electronics for increased stability and reliability.
Housing is made from high impact ABS.
IP55 protection rating.
Dimensions are approx. 10cm x 1ocm x 9cm (4" x 4" x 3.5").
Weight is approx. 145 grams (5 ounces).
Typical mounting height is around 3M (10').
Made in Great Britain.

Installation
Surface mount to any vertical surface.

Notes
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and set facing South at about a 45-60 degree angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.

* View our Terms, Conditions and Polices (including our Returns Policy) for further information.

Tags: RC12
LET US KNOW YOU AGREE TO COOKIES
We use cookies to give you the best online experience. Please, let us know if you agree to all of these cookies