This solar powered mini bollard stands approx. 44cm tall and can be installed on to any solid level surface. The fitting is supplied with a motion sensor which switches the light from 1/3 brightness to full brightness when motion is detected.
This mini bollard light is fitted with several warm white LEDs which emit 200 Lumens of warm white light when in full brightness. It automatically activates at dusk at 1/3 brightness, and switches to full brightness when motion is detected. The light will typically operate until dawn in optimum conditions. The bollard stands approx. 44cm tall. A solar panel is discreetly installed in the top of the light fitting. All aluminium construction with a four sided clear polycarbonate lampshade. Installation is simple, just secure the base using four screws or bolts into any solid surface. Colour of light output is warm white. Colour of product is grey. Sold as a single unit.
Perfect for decks, patios, driveways, pathways etc. or anywhere where you need an economical, outdoor decorative light.
Typically illuminates dusk to dawn.
Equal to approx. 25 Watts.
Light switches from 1/3 brightness to bright mode via motion sensor.
Light output is approx. 200 Lumens at full brightness.
Designed for decorative light use.
32 warm white LEDs.
Built in motion sensor.
Aluminum body construction.
Clear polycarbonate lamp sahde.
Complete fixture stands approximately 44cm (17.5") high.
Lampshade is approx. 16.5cm (6.5”) wide and approximately19cm (7.5") tall.
The base is approximately 15cm (6”) wide and has four pre-drilled holes enabling fixing.
A lithium rechargeable battery is included.
A high quality 1.6 Watt solar panel is built into the top of the lampshade.
Base should be fixed to a flat, solid surface using three screws or two bolts (not included).
Install light so that it will have full direct sun light.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and set facing South at about a 45-60 degree angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.