This compact wall mount 12 LED sign light can illuminate a sign up to 2 metres x 2 metres and will typically illuminate for up to 8 hours. The 12 LEDs turn on automatically at dusk and will run through the night. Easy to install. Priced at £59.99.
This solar powered sign light fitting uses 1W LED power and produces an output of 96 lumens which is equivalent to approximately 20 watts of incandescent lighting. It activates automatically at dusk and can typically illuminate for up to 8 hours in optimum conditions. The solar panel is built on the top of the light fitting, and the 12 LEDs are on the underside of the light. There is a small switch installed on the lamp, when left in the on position the light will illuminate automatically at dusk. The lamp is supplied with a support arm that comes in two sections, one or both sections can be used to suit your requirements. The light can mounted above a sign up to 2 metres x 2 metres, and shine down to illuminate it. Colour of light output is white. Colour of light fitting is White.
Ideal for small sized signs up to 2 metres x 2 metres.
Perfect for use where electricity is unavailable or too expensive or difficult to install.
Quick and easy permanent or temporary installation.
May provide illumination to a sign up to about 2m x 2m.
Illumination time is typically up to 8 hours subject to various factors.
Colour of light fitting is white.
Colour of light output is white.
Fitted with an on/off switch.
12 bright Cree® LED's providing 96 lumens (equal to about 20 watts of incandescent lighting).
1W LED power.
Automatic illumination at dusk and off at dawn.
Lampshade dimensions (main lamp body) approx. 17.5cm x 12cm x 2cm (7" x 4.75" x .75") LxWxH.
The support arm is supplied in two 19.5cm (7.75") sections that can be joined to create one 39cm (15.5") arm.
A lithium rechargeable battery is supplied.
Life expectancy of batteries is around 3-5 years.
A 1.8 watt solar panel is installed on the light.
The solar panel is built on the top of the lamp.
Easy to install almost anywhere.
For use in dark locations.
Install where solar panel is in direct sun light.
Screw or bolt the arm base to solid level surface.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and set facing South at about a 45-60 degree angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.