This solar powered lamp post retains some traditional styling while providing an exceptional light output. It is ideal for both residential and commercial applications including private developments, housing estates, footpaths, parks, entrance ways, public areas, small streets etc. This model is supplied with a choice of 3m or 4m root mount or flange mount column.
This commercial grade lamp post is our own design. It includes a large cast aluminium lampshade is fitted with polycarbonate lampsahde containing multiple, super bright, white LEDs. The light output is 1,000 Lumens when operating at 100% brightness which is comparable to about a 65 watt incandescent light bulb. The solar panel is neatly built into the top of the lampshade so that it remains discreet and not noticable once installed on the top of a column. The light will automatically illuminate when it gets dark and operate at full brightness for the first 5 hours after which it will revert to 25% brightness afterwards. Colour of light output is white. Colour of product is black. Colour of column is unfinished (glavanised steel) and may be painted black if required, Sold as a single unit.
This lamp post light can be used to replace an existing lamp post that is damaged or where the electric cable is defective or as a new installation. Suitable for residential or commercial applications. A popular choice with private developments, housing estates, communities, parks, and local authorities. This product can also be used for driveways, small car parks, footpaths and general public areas etc.
Typically dusk to dawn illumination.
Up to 3 days reserve (autonomy) power to allow for cloudy days (subject to local conditions).
Commercial grade quality.
Matt black powder coated finish.
I.P. 65 rating.
Light output is 1,000 lumens at 100% brightness and 250 lumens at 25% brightness.
Output is equal to about 65W of incandescent lighting.
LED power consumption is 10 Watts.
LED colour temperature for white (5000~6000k).
White polycarbonate lamp shade.
Cast aluminium construction.
Matt black powder coated finish.
Lamp is secured to the top of a column using the 4 bolts (included).
The lampshade is approximately 51cm (20”) wide (at widest point) x 47.5cm (19”) tall.
A 3.7V 26000 mAh lithium battery is supplied and pre-installed.
Battery life expectancy is typically up to 1000 cycles.
Battery is replaceable when necessary.
A choice of 3m or 4m column is available.
Choice of root mount (direct burial) or flange mount (surface) type base.
Standard columns are root mount, galvanised steel, tubular and with a 76mm diameter top.
The root mount column is supplied with an additional 750mm to 1000mm for burial.
The flange mount column is suplied with an anchor kit and template.
Heavier duty columns of 89mm and 114mm diameter are available by special order.
Other column heights are available by special order.
Coloured painted or powder coated finishes are available by special order.
Integrated charge controller supplied.
Prevents over charge / over discharge of battery.
Controls light operation.
An 18 Watt solar panel is supplied.
Solar panel is integrated into the top of the light fitting.
Lamp requires full, direct sunlight throughout the day.
Avoid installing in shaded areas, around trees or tall structures.
Long anchor bolts and templates are included for setting into new wet concrete.
Alternatively, the pole could be bolted to an existing concrete pad using appropriate expanding bolts (not included).
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and set facing South at about a 45-60 degree angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.