This lamp post is based on our PO04 lamp post, but comes with a choice of 3M or 4M galvanised steel column (root or flange mount). It is suitable for commercial applications such as parks, recreational areas, parking areas, etc. The light fitting is of all aluminium construction with a clear polycarbonate lampshade.
This solar powered lamp post which features a heavy duty steel pole is designed for commercial applications. Great for public areas such as parks, recreational areas, car parks, etc. The lamp section is all aluminium construction, has a vandal resistant clear polycarbonate lampshade, and includes a solar panel discretely built into the top of the lampshade. The light fitting stands about 66cm high, with about a 36cm diameter lampshade, and contains 51 LED bulbs which never need replacing. The light output is equal to about 75 watts of conventional lighting. We offer an optional auxiliary solar panel kit - see product code SP01. This optional solar panel kit is recommended for those wanting the maximum illumination time and to provide additional charging during in winter months and in less favourable locations. We also offer matching 'Balmoral' solar lights in the same 'Balmoral' series. Choice of either a 3M or 4M root mount or flange mount galvanised steel column. Colour of product is black. Colour of light output is white. Sold as a single unit.
Used in parks, car parks, housing developments, entrance areas, driveways and pathways etc. It can be used for both residential and commercial applications as well as use in public areas.
Typically dusk to dawn illuminations (may require auxiliary solar panel kit SP01).
Light output is equal to approximately 75 watts of incandescent lighting.
Provides up to a 15 meter diameter light spread.
4W LED power.
51 super bright, high output Cree® LED bulbs inside the lampshade.
Each LED provides 8 lumens, 408 lumens total output.
Automatic dusk-to-dawn operation controlled via the solar panel.
Discrete on/off switch for manual over-ride.
Included power jack to add an auxiliary 12v. solar panel (SP01).
I.P. 65 rating.
Black coloured finish.
The light from the LED's shines through a clear polycarbonate lampshade.
Concave upper reflector and convex lower reflector within the lampshade housing, to enhance illumination output.
The clear polycarbonate lampshade section alone is approximately 35cm diameter (at its widest (top)) and approximately 28cm high.
The overall lampshade section is approximately 62cm high and approximately 35cm diameter.
Entire lamp post stands approximately 3.5 metres high.
Includes a 12 Volt 9 Amp/Hour rechargeable battery (replaceable) located inside the bottom of the lampshade.
Life expectancy of batteries is around 2-3 years.
A choice of 3m or 4m column is available.
Choice of root mount (direct burial) or flange mount (surface) type base.
Standard columns are galvanised steel, tubular and with a 76mm diameter top.
The root mount column is supplied with an additional 750mm to 1000mm for burial.
The flange mount column is suplied with an anchor kit and template.
Heavier duty columns of 89mm and 114mm diameter are available by special order.
Other column heights are available by special order.
Coloured painted or powder coated finishes are available by special order.
High quality, discrete, integral, solar panel fixed flush into the top of the lampshade.
Additional solar panels are recommended for boosted solar power (see part SP01).
The SP02 solar panel kit may be required to allow longer illumination time and enhanced charging during the winter months.
Anchor kit is supplied for setting into new wet concrete.
Alternatively, the pole could be bolted to an existing concrete pad using appropriate bolts (not included).
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and set facing South at about a 45-60 degree angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.
|Solar Lights Data|
|Lumen Output||408 lumens|
|Equivalent Incandescent Wattage||75 watts|
|Approximate Illumination Time||Typically dusk to dawn (may require auxiliary solar panel kit (SP01)|
|Approximate Illumination Area||Up to about 12 meters diameter|
|Pole Height||3m or 4m|