This professional, commercial grade, vandal resistant, solar powered bollard light is very unique. It is fitted with 16 super bright, white LEDs and with its 5W LED power, it offers an excellent light pattern 360 degrees outwards, several metres. It can be easily installed almost anywhere. It's ideal for footpaths, car parks, pedestrian and public areas etc. and where suitable conditions permit. Choice of flange mount or root mount installation.
The main body of this light fitting is made from a powder coated, marine grade, anodised aluminium of over 6mm in thickness. It features a Lexan SLX polycarbonate lampshade which is UV protected to resist yellowing. It is designed and built for the most demanding applications and has the highest vandal resistant rating of any solar powered bollard on the market (IK10++ rating). It's completely weatherproof with an IP68 rating. It stands 1M tall and is available with a choice of mounting types, conventional flange mounting onto a flat, solid, horizontal surface or root mounted with about 200mm inserted into the ground. This bollard features a 6.3W monocrystalline solar panel that is neatly and discretely built into the upper section. It also has an integrated microwave sensor to detect motion or activity within range. The LED lighting will operate automatically from dusk at either 30%, 40% or 50% brightness. When it detects activity (e.g. somebody approaching) it will increase the LED power to 100% (5W / 560 lumens). When no more motion is detected, a minute afterwards it will revert back to 50% brightness. This bollard is supplied with an integral, pre-installed, powerful lithium battery and MPPT charge controller and features a special battery management system making it perfect for northern locations such as the UK. Available in a choice of two types (flange mount or root mount). Colour of light output is white. Colour of product is black. Sold as a single unit. PLEASE NOTE: THIS IS A SPECIAL ORDER PRODUCT.
Perfect for entrances, car parks, housing estates. footpaths and driveways. May be used in either a residential or commercial environment.
Professional, commercial grade.
Vandal resistant design and construction.
Automatic illumination at dusk and off at dawn.
16 super bright, high output, white coloured LEDs.
Each LED produces 35 lumens (130 lm/W).
IES file available upon request.
LED power is 5W (560 lumens total at 100% brightness).
At 50% brightness the LED power is 2.5W (280 lumens).
At 40% brightness the LED power is 2W (224 lumens).
At 30% brightness the LED power is 1.5W (168 lumens).
Clear vandal resistant sabic lexan SLX polycarbonate lampshade.
UV treated to prevent yellowing.
IK10++ rating and certification.
IP68 weather rating.
Temperature range is -20 deg C (-4 deg F) to +80 deg C (176 deg F).
LED colour temperature choice is 3000k to 6500k.
Integrated 360 degree microwave motion sensor.
Main body section is made from marine grade, anodized aluminium over 6mm thick.
Black powder coated finished to main body section.
Standard coloured finish is black.
Other colours by special order.
The bollard has a main body that is approx. 10cm (4") diameter.
The flange mount bollard stands approx. 80cm (32") high.
The flange section is approx. 18.5cm (7") diameter,
The flange section has three 10mm pre-drilled holes.
The root mount bollard stands approx. 100cm (39") high but approx. 20cm (8") is for burial.
The clear lampshade section is approx. 28cm (11") diameter.
Other heights available by special order.
Certifications include CE, IEC, TUV,IESNA, RoHS LM-79 and LM-80.
Manufactured in an ISO9001 quality assured facility.
Supplied with a pre-installed lithium (LIFEPO4) battery.
The lithium battery is 3.2V / 12 A-Hr.
Typical lifepsan is over 10 years and is replaceable.
Integrated MPPT charge controller.
Battery management system (BMS) feature.
Over load, over current, over temperature, over voltage, over charge and over discharge monitoring and protection.
High quality 6.3 Watt encapsulated monocrystalline solar panel.
The solar panel is set into the top section of the bollard fitting.
Grade A rated with tempered glass top.
The flange mount version is easily installed onto almost any horizontal, solid surface such as concrete, tarmac, wood, paving etc.
Installation time is usually less than 5 minutes per bollard.
The base section of the bollard has 4 pre-drilled holes for screw-down or bolt-down installation.
We recommend using stainless steel or galvanised steel expanding anchor bolts.
The root mount version will require a hole to be dig to accommodate the root section of the bollard body.
This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and set facing South at about a 45-60 degree angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time, insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’ or 'not fit for purpose'. All solar lights must be used in a dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.
|Solar Lights Data|
|Lumen Output||560 Lumens.|
|Equivalent Incandescent Wattage||Approx. 100W.|
|Approximate Illumination Time||Typically dusk to dawn.|
|Approximate Illumination Area||Up to approx. 6M diameter.|