This commercial grade, solar powered LED bollard light is fitted with powerful, bright white Philips LEDs and offers an excellent light pattern 360 degrees. It is quick and easy to install almost anywhere. That makes it perfect for footpaths, car parks, pedestrian and public areas etc.
New for 2020. This heavy duty, professional, solar bollard light fitting is made of die-cast aluminium and features a clear polycarbonate lamp shade. Standing 1M tall, it's equipped with 4W of LED power offering a massive 500 lumen output in full brightness mode. The light distribution is 360 degrees, so in a dark location it will project light outwards and downwards for several metres all around. Installation is easy and because it's solar powered and self-contained, no trenching, no mains power connection and therefore no electrician required. Colour of light output is white. Colour of product is black. Sold as a single unit. PLEASE NOTE: THIS IS A SPECIAL ORDER PRODUCT.
Ideal for commercial applications including small streets, driveways, communities, footpaths, trails, housing estates, car parks and general outdoor areas.
Professional, commercial grade bollard light fitting.
Heavy duty design and construction.
Automatic illumination at dusk and off at dawn.
Light will remain at 20% power until motion is detected.
PIR sensor has a 2 metre 180 degree range.
16 super bright, high output, white coloured, Philips LEDs.
Each LED produces 35 lumens (130 lm/W).
IES file available upon request.
LED power is 4W (500 lumens total, at 100% brightness).
Clear polycarbonate lampshade.
UV treated to prevent yellowing.
IP68 weather rating.
Temperature range is -20 deg C (-4 deg F) to +80 deg C (176 deg F).
LED colour temperature choice is 3000k to 6500k.
Integrated passive infra-red motion sensor (PIR detector).
Main body section is made from marine grade, die cast aluminium.
Black powder coated finished to main body section.
Standard coloured finish is black.
Grey and other colours by special order.
The bollard has a main body that is approx. 16cm (6.5") diameter.
The total height is approx. 100cm (39").
The flange section is approx. 18.5cm (7") diameter,
The flange section has three 10mm pre-drilled holes.
The clear lampshade section is approx. 39cm (15") diameter.
Other heights available by special order.
Certifications include CE, IEC, TUV,IESNA, RoHS LM-79 and LM-80.
Manufactured in an ISO9001 quality assured facility.
Supplied with a pre-installed lithium (LIFEPO4) battery.
The lithium battery is 6.4V / 6 A-Hr.
Typical lifespan is over 10 years and is replaceable.
Integrated MPPT charge controller.
Battery management system (BMS) feature.
Over load, over current, over temperature, over voltage, over charge and over discharge monitoring and protection.
High quality 6.3 Watt encapsulated monocrystalline solar panel.
The solar panel is set into the top section of the bollard fitting.
Grade A rated with tempered glass top.
The flange mount version is easily installed onto almost any horizontal, solid surface such as concrete, tarmac, wood, paving etc.
Installation time is usually less than 5 minutes per bollard.
The base section of the bollard has 4 pre-drilled holes for screw-down or bolt-down installation.
We recommend using stainless steel or galvanised steel expanding anchor bolts.
The root mount version will require a hole to be dig to accommodate the root section of the bollard body.
This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once
returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and set facing South at about a 45-60 degree angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time, insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’ or 'not fit for purpose'. All solar lights must be used in a dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information
|Solar Lights Data|
|Lumen Output||500 lumens.|
|Equivalent Incandescent Wattage||Approx. 40W.|
|Approximate Illumination Time||Typically dusk to dawn.|
|Approximate Illumination Area||Up to approx. 5M diameter.|