This high quality, weatherproof, quad element, digital motion sensor is designed to be configured with many of the lighting systems that we offer. This is a professional, commercial grade, 12/24 volt PIR motion detector, programmable with a fully adjustable detection from 8m to 29m (873 square metres). It has a coverage area of 70 degrees, 29m x 29m max. Its many features include customised optics, user/installer programming, temperature compensation, adjustable pulse count (sensitivity) settings etc. Features two, dual element (Quad) pyroelectric passive infra-red sensors (two pairs of sensors built in to one to help eliminate false detections). With the two dual element sensors working together, both sensors have to trigger at the same time, reducing the chance of false activations.
High performance, high quality sensor.
Professional, commercial grade, low voltage, PIR (passive infra-red) motion detector.
Detection area adjustable from 8m to 30m (26' to 97').
Detection coverage is up to 900 square meters (9,400 square feet).
Coverage is 10-70 degrees maximum 30m x 30m (97' x 97').
Fresnel Lens with 28 zones per pyroelectric sensor (56 total) and white light filter.
Dual axis allows lens adjustment up to 180 degree pan and up to 90 degree tilt.
Lens sections can be masked (if required) with masking foil supplied.
Customised Optics with double silicon shielded dual element (50,000 Lux reduction ability)
UV stabilized translucent outer cover.
Four solid state outputs available
Output # 1 is a voltage free relay with timer, selectable normally open/closed, rated to 24v dc @ 50mA, relay timer period adjustable from 2 to 60 seconds.
Output # 2 is a voltage free relay with timer, selectable normally open/closed, rated to 24v dc @ 50mA, relay timer period adjustable from 2 to 60 seconds.
Output # 3 is open collector negative switching, 25mA max, relay timer period is 400ms.
Output # 4 is open collector negative switching, 25mA max, relay timer period is +60 seconds, adjustable Lux settings from 2 Lux (dusk) to 24 hour (day).
Power input is 9 to 24v ac/dc.
Current is 10mA (at 12v dc nominal)
Pulse count (sensitivity) is adjustable from 1-3.
Anti-tamper switches (front and rear) with optional and programmable output.
Automatic temperature compensation with digital sensitivity adjustment.
Digital ASIC/microprocessor control with non volatile memory.
Walk test option with LED indication.
Typical operating temperature is -20 deg. C to 55 deg. C (-4 deg. F to 131 deg. F).
Conformally coated electronics for increased stability and reliability.
Housing is made from high impact zinc alloy.
IP55 protection rating.
Dimensions are approx. 14cm x 12cm x 11cm (5.5" x 4.5" x 4").
Weight is approx. 750 grams (26 ounces).
Typical mounting height is approx. 3 meters (10’).
Made in Great Britain.
Surface mount to any vertical surface.
Optional column mount bracket available to mount onto columns sized from 45mm to 165mm diameter.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and set facing South at about a 45-60 degree angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.