This unique, all-in-two style has the added flexibility to set the orientation and angle of the solar panel to suit the location of the installation site. This integrated light is available in two different models. The 20W version up to 3,600 Lumens and the 30W version up to 5,400 Lumens. All models offer four different operational modes which are selectable via a remote control. Four of the modes allow motion activation using an integral microwave sensor to detect activity within its range. A choice of column is included (3M, 4M, 5M, 6M root or flange mount). Higher output (40W, 50W, 60W, 80W and 100W) version are available by special order. Prices from £1,099.99. Colour of product is silver/grey. Colour of light output is white.
Ideal for small streets, car parks, commercial yards, storage areas, compounds, playgrounds, multi use play areas (MUGA), and general outdoor area lighting, etc.
Unique, compact, all in two, integrated design.
High quality aluminium alloy and full die-cast aluminium construction.
Silver/grey finish. Other colours by special order.
304 Grade stainless steel hardware.
Automatic detection of day and night using 30 Lux threshold.
Corrosion resistant and wind resistant design.
Weather rating is I.P. 65
Certified ISO9001:2015 Quality Assured
Meets internal standards ISO14001, IEC61215, IEC61730, CE, RoHS, FCC, TUV and SGS.
Supplied with a remote control to select a operation mode.
Operational mode 1: 20% power all night, 100% power when motion is detected.
Operational mode 2: 2 hours 100% power, 2 hours at 50% power, then off until motion is detected.
Operational mode 3: 3 hours 100% power then off until motion is detected.
Operational mode 4: 2 hours 100% power, 3 hours 40%, 2 hours 20%, then off.
Operational mode 5: Only activated when motion is detected (100% power).
The light fitting includes a microwave motion detector, which is usually superior than PIR motion detectors.|
Microwave detector senses exterior physical movement of objects such as people, vehicles etc. and should not be positioned where other movement sources could cause false activations.
Microwave detectors are not typically affected by wind, dust, temperature, humidity etc.
Fitted with Type II optics as standard (typically for regular streets and walkway applications etc.).
Type III optics are available as an option (typically for general areas, parking lots and wider streets etc.).
A microwave motion sensor is built into the fitting on all models (operational when motion detector modes are selected).
Motion sensor detection range (at ground level) is up to 15M (50') forward, up to 7.5M (25’) each side with up to a 90 degree angle.
The luminaire is fitted with multiple Bridgelux® LEDs which have a colour temperature of 6000k.
High luminous efficiency LEDs up to 210lm/w.
The 20W model provides 3,600 Lumens at full power.
The 30W model provides 5,400 Lumens at full power.
A 40W, 50W, 60W, 80W and 100W version is available by special order.
The 20W model is ideal for use on a pole of 4m to 6m (13’ to 20’).
The 30W model is ideal for use on a pole of 5m to 8m (15’ to 26’).
All versions incorporate an internal high capacity Lithium (LiFePO4) battery pack which is pre-installed.
Battery lifespan is up to 8 years.
Battery is easily replaced when required.
The 20W version is fitted with a 27AH 12.8v DC.
The 30W version is fitted with a 33AH 12.8v DC.
An integral MPPT charge controller is included and pre-installed.
The MPPT charge controller is up to 30% more efficient than standard PWM controllers.
The system has built-in charge control regulation with over-charge and discharge protection.
Hybrid (solar/grid tied) versions are available by special order.
Optional smart interface available allowing GPRS/3G/4G remote management and networking for operational monitoring, control adjustments, data analysis etc.
Choice of 3m, 4m, 5m or 6 Metre column.
Column diameter is 76mm.
Column type is galvanised steel, root mount (direct burial)
The 3 and 4 Metre root mount column has approx. 75cm for burial.
The 5 and 6 Metre root mount column has approx. 100cm for burial.
Heavier duty columns are available with 89mm or 114mm diameter.
Flange mount columns for surface type installations (complete with anchor kit and template) are available at extra cost.
Painted or powder coating coloured finishes are also available at extra cost.
Alternative column heights are available by special order.
Supplied with an aluminium framed, monocrystalline, silicon solar panel.
The solar panel size (Wattage) is determined by several factors, including geographic location, LED power/consumption, and/or illumination time and modes required.
The solar panels are sized appropriately for winter conditions in the UK and may vary depending on the installation site and location.
360 degree rotation and tilt capabilities.
The 20W model is typically supplied with a 100 or 120 Watt 18V DC solar panel.
The 30W model is typically supplied with a 200 Watt 18V DC solar panel.
The 100/120W solar panel is approximately 91cm x 66cm x 3cm
The 200W solar panel is approximately 150cm x 81cm x 3cm
The solar panel should face as south as possible, set at the correct tilt/angle, and not be exposed to any shade or part shade during the day.
Suitable for column mounting only.
Column must be 60 to 76mm (2.5” to 3”) outside diameter (OD).
Other column diameters are acceptable with the use of a tenon (not included).
Easy to install onto a round column.
Fast installation time (typically 15 minutes or less once the column is installed).
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and set facing South at about a 45-60 degree angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.