We designed this powerful solar lamp post light to meet the demands from customers requiring an aesthetically pleasing lamp post that can offer higher than normal levels of illumination and equal that of a standard incandescent light bulb. Installation is easy as the aluminium lamp post comes in sections.
This lamp post is uniquely and exclusively for Solar Illuminations and not available anywhere else. This aluminium lamp post has two vandal resistant, clear polycarbonate lampshade, and houses solar panel discretely on the top of the fittings. The lampshades are about 62cm high and about 34cm diameter, the total height of the lamp post is over 3.5 metres high. The lampshade contains 51 LED bulbs which never need replacing. The light output is equal to about 75 watts of conventional lighting. When installed in a completely dark location the light spread can be seen for several metres around the lamp post. Installation is easy as this lamp post will simply bolt or screw down onto any solid, horizontal surface. We offer an optional auxiliary solar panel kit - see product code SP02. This optional solar panel kit is recommended for those wanting the maximum illumination time and to provide additional charging during in winter months and in less favourable locations. Colour of product is black. Colour of light output is white. Sold as a single unit.
Ideal for residential applications such as driveways, entrances, courtyards and open areas Not suitable for commercial or public area use or in high wind zones. Consider our PO11 model instead.
Typically dusk to dawn illuminations (may require auxiliary solar panel kit SP02).
Discrete on/off switch for manual over-ride.
Aluminium construction with polycarbonate lampshade.
Black coloured finish.
I.P. 65 rating.
Concave upper reflector and convex lower reflector within the lampshade housing, to enhance illumination output.
Each lamp contains 51 super bright, high output LED bulbs.
Light output is 408 lumens, per lampshade (equal to about 75w of incandescent lighting, per lampshade).
The lighting is visible through the clear, vandal resistant, polycarbonate lampshade.
Suitable for residential, and commercial applications, as well as for use in public areas.
Each lamp section stands approximately 66cm (26") high (max.).
The clear polycarbonate lampshade section alone is approximately 36cm (14") diameter (at its widest (top)) and approximately 28cm (11") high.
Each lamp includes a 12 Volt 9 Amp/Hour rechargeable battery (replaceable) inside the bottom of the lampshade.
Life expectancy of battery is around 2-3 years.
Lightweight sectional aluminium column included.
Holes are pre-drilled into the pedestal base for screw or bolt down fixing.
The pre-drilled holes are approx. 127mm (1/2”) diameter.
The pedestal base has a footprint of approximately 25cm x 25cm (10” x 10”).
Supplied in sections which simply fix together in minutes.
Column height alone, is approx. 3 metres (10’).
Not suited to high wind zone areas.
Not suitable for use in commercial or public areas. Consider our PO10 model instead.
High quality, discrete, integral, solar panel fixed flush into the top of each lampshade.
Additional solar panels are recommended for boosted solar power (see part SP02).
The SP02 solar panel kit may be required to allow longer illumination time and enhanced charging during the winter months.
Anchor kit is supplied for setting into new wet concrete.
Alternatively, the pole could be bolted to an existing concrete pad using appropriate bolts (not included).
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and set facing South at about a 45-60 degree angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.
|Solar Lights Data|
|Lumen Output||408 lumens per lampshade|
|Equivalent Incandescent Wattage||75 watts per lampshade|
|Approximate Illumination Time||Typically dusk to dawn (may require auxiliary solar panel kit (SP02)|
|Approximate Illumination Area||Up to about 18m diameter|
|Pole Height||3 meters|