This system includes a powerful LED mini floodlight, supplied with a motion sensor which is ideal for security lighting or illuminating open areas, etc. This kit is designed to typically offer up to 200 minutes of illumination time (40 x 5 minute activations).
This kit comprises of a compact light fitting containing a powerful 10W LED (900 Lumens) providing an approximate 120 degree beam spread. The system will automatically activate at dusk and the light will illuminate when motion is detected by the motion sensor. The kit is supplied with the light fitting, a weather proof battery box, a programmable MPPT charge controller, a 20 Watt solar panel, a 12 Volt rechargeable battery, and a exterior rated PIR motion sensor. The battery box is supplied with outlets for the solar panel and light fittings to plug in to. The solar panel, light fitting, and motion sensor are supplied with several metres of cable, so they can be mounted away from the battery box if needed. Colour of light fitting is grey. Colour of other parts of the system are grey. Colour of light output is white.
Perfect for applications that require lighting without any near-by electricity. This floodlight can be used for many different applications, such as security lighting, or floodlighting. Great for commercial buildings or for use around industrial estates for area lighting or lorry loading bays.
Manufactured in an ISO9001:2008 'Quality Assured' facility.
This system offers up to 200 minutes of illumination time.
Can illuminate an area up to about 12m x 12m (40’ x 40’) depending on height installed.
If you require dusk to dawn lighting we have other similar systems available that can provide this.
One light fitting is included in this system.
The lamp is fitted with powerful 10W SMD/LED.
Light output is 900 Lumens (equal to approx. 200W of incandescent lighting).
LED beam angle is approx. 120 degrees.
White LED colour temperature is approx. 6000-6500k.
The lamp is fitted with approximately 5.5 metres (18') of pre-plugged cable.
Additional extension cable is available (upon request) as an option.
The light fitting is weather rated to I.P 65.
The lamp's mounting bracket has pre-drilled holes to allow fixing using screws or bolts (not included).
Grey coloured finish of light fitting.
Light fitting dimensions approx. 11cm x 9cm x 8cm (4.5" x 3.5" x 3") LxWxD.
One high capacity 12 Volt 9 Amp-Hr sealed lead acid battery is supplied.
Battery type is AGM. Gel battery is available by special order.
A plastic weatherproof battery box is supplied to accommodate the battery.
The battery box has a removable front which is lockable (padlock not included).
The battery box also houses the charge controller.
The battery box is approx. 27cm x 20cm x 12cm (10.5" x 8" x 4.5") LxWxD.
Aluminum framed 20 Watt solar panel is included.
The solar panel is fitted with approximately 3 metres (10') of cable/cord.
Additional cord is available as an optional extra.
The solar panel cable connects directly to the battery box.
The solar panel support is supplied with a fold-out 'U' shape bracket which can be used to mount it to a suitable surface.
The 20W solar panel dimensions approx. 35.4cm x 57.3cm x 2.5cm (13.88" x 22.63" x 1") LxWxD.
Features a single, dual element pyroelectric passive infra-red sensor (two sensors built into one to help eliminate false detections).
Detection area adjustable from 10m to 35m (33' to 114').
Detection coverage is up to 1,050 square metres (11,000 square feet).
Coverage is 90 degrees 35m x 30m maximum (114' x 97').
Surface mount to almost any vertical surface.
Recommended mounting height is approx. 3 metres (10').
The motion sensor is fitted with approximately 5.5m (18') of pre-wired cable which is pre-plugged ready for easy connection to the battery box.
Supplied with a MPPT charge controller which automatically controls the solar panel power, battery charging and lighting function and operation.
Ultra fast Maximum Power Point Tracking (MPPT).
The MPPT charge controller is typically 30% more efficient than standard PWM controllers and 10% more efficient to most other MPPT controllers.
Additional efficiency for cloudy weather and during times of reduced sun radiation.
This controller features the very latest smart technology.
Provides extended battery life and extra protection against excessive battery discharge and overcharge.
Battery life algorithm operates 24/7.
Low voltage detection for automatic disconnect.
Continuous environment, input and output power management.
The controller is sized to the system specifications with 10A and 15A versions available (subject to solar panel wattage and battery capacity).
Pre-programmed software for load output, dusk to dawn lighting, single timed lighting, dual timed lighting, dimming option and the ability of interfacing with motion detection, where required.
This MPPT charge controller is programmed by Solar Illuminations as per your requirements and system ability.
Lighting control features illumination from dusk to dawn (where applicable), or on at dusk for X amount of hours then off, or on at dusk for X amount of hours, then off, then back on again for X amount of hours before dawn.
Dimming option (where applicable) allows the lighting to dim at any time during the illumination time.
The dimming option or any other illumination mode can be used in conjunction with motion activation (where applicable).
Dimming may be at any percentage from 1-99%.
Supports real time data monitoring (iPhone, Andriod, Mac or PC) with optional interface and/or Bluetooth dongle.
Battery voltage 12/24V dc auto select.
Rated charge current 10A/15A.
Maximum PV power (12V dc) is 135W at 10A and 200W at 15A.
Maximum PV power (24V dc) is 270W at 10A and 400W at 15A.
Maximum PV open circuit is 75V dc.
Peak efficiency is 98%.
Charge voltage (absorption) is 14.4V dc.
Charge voltage (float) is 18.8V dc.
Multi stage adaptive charge algorithm.
Automatic temperature compensation.
Low voltage load disconnect at 11.1V dc to 11.8V dc (12v dc system) or 22.2V dc to 23.6V dc (24V dc system) or battery life algorithm.
Low voltage load reconnect at 13.1V dc to 14V dc (12V dc system) or 26.2V dc to 28V dc (24V dc system).
Protection feature includes battery reverse polarity (fuse), output short circuit and over temperature.
Operating temperature is -30 deg. C (-22 deg. F) to +60 deg. C (140 deg. F).
Humidity up to 95%, non condensing.
Power terminals are AWG 10 (6mm2).
Protection rating IP22 (connection terminal area).
Weight is 500g (1.1 Lbs).
Dimensions are approx. 10cm x 10cm x 4cm (4” x 4” x1.5”).
Please note: Upon installation and power-up the controller goes into a 7 day evaluation mode where smart monitoring and configurations commence. Additional evaluation with self-managing adjustments may continue for up to 7 more days. This is all part of the smart feature that enables this intelligent controller to understand its use, the application, the surrounding environment and the current conditions. During this time some of its programmed features may differ temporarily. This is a perfectly normal process and must be accepted during that time. During this time the controller will adjust to the current condition and charge status of the batteries. It is therefore recommended that all batteries are 100% fully charged before connection using an appropriate battery charger. This may significantly reduce the evaluation mode time of 7+7 days to much less. The solar panel(s) should be connected to the MPPT charge controller first, followed by the fully charged batteries.
Easy to install.
All connections are simple plug & play.
Mount the solar panel facing south, away from shade or other obstructions.
Ideal solar panel installation angle is 15 degrees + installation latitude.
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and set facing South at about a 45-60 degree angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.