This professional system includes a powerful 20W, 30W or 40W LED floodlight that can emit up to 4,100 lumens. The system is supplied with necessary components including solar panel, battery box, batteries, MPPT charge controller, a choice of 4m, 5m, or 6m root mount or flange mount steel column and all necessary hardware. Price from £1,499.99.
This solar powered, commercial grade, area light uses a 20W, 30W or 40W which can be used to illuminate large areas. Supplied as standard (with a 30W LED lamp), the system will allow for up to 5 hours of continuous nightly illumination (including during the winter). Various solar panel sizes are available for locations requiring higher powered options. This system is supplied with a metal lockable battery box, two 12 Volt rechargeable batteries, an MPPT charge controller, a 70 Watt solar panel, a 4m, 5m, or 6m galvanised steel column (root mount or flange mount), and column mount hardware. The battery box can be mounted at any height on the column, as desired. The LED floodlight can be positioned at any point on the column and has angle adjustment to enable the desired lighting pattern. As standard, this system is supplied with a manual on/off switch attached to the battery box. Other light switch options include a wired remote switch, and a wireless remote controlled switch. For multiple light installations, the option of wireless remote control allows all lights to turn on or off at the same time for added convenience. Colour of light fitting is black. Colour of other parts of the system are grey. Colour of light output is white.
Car parks, yards, storage areas, playgrounds, multi use games areas (MUGA), and general outdoor areas, etc.
Sold as a complete, professional, commercial grade lighting system.
Manufactured in an ISO9001:2008 'Quality Assured' facility.
Illumination time is up to 5 hours.
Designed to allow daily operation throughout the week.
Supplied with up to 3 nights of autonomy (reserve power).
System includes one 20W, 30W or 40W weatherproof LED floodlight.
The lampshade is fitted with 18 powerful SMD/LEDs with precision optics.
The 20W luminaire emits 2,050 lumens.
The 30W luminaire emits 3,075 lumens.
The 40W luminaire emits 4,100 lumens.
The floodlight is fitted with approx. 14 metres of pre-plugged cable.
Additional cable and extension cords are available.
The floodlight fitting is weather rated to I.P 65.
Black coloured finish.
The lampshade is supplied with a 'U' shape mounting bracket which allows for vertical adjustment of the light beam spread.
The light fitting can be mounted at any point on the column below the solar panel.
Lampshade dimensions (main lamp body) approx. 29cm x 22.5cm x 4.5cm (LxWxD).
Two 12 Volt 18 Amp/Hr sealed lead acid batteries are supplied as standard.
24 Volt dc system.
Batteries must be connected together in series.
Larger capacity batteries are available and may be required as necessary.
A remote battery box is supplied to accommodate the batteries, and charge controller.
The battery box has a hinged lid which is lockable (padlock not included).
The battery box has sockets for the lights, and solar panel to connect to.
Can be installed at any height on the column (top, middle, or base).
The battery box is approx. 30.5cm x 25.5cm x 15.3cm (12" x 10" x 6") LxWxD.
Supplied with a 70 Watt aluminium framed solar panel as standard.
Higher powered solar panel options are available and may be required as necessary.
For help determining whether a solar panel upgrade is necessary, please contact our customer service department.
Supplied with approximately 5m (17’) of cable to connect directly to the battery box.
Mounting frames are included to allow the solar panel to attach to the column.
The 70W solar panel dimensions approx. 89.3cm x 66.8cm x 3.5cm (32.35” x 26.22” x 1.5”) LxWxD.
Higher wattage solar panels will have large dimensions.
A choice of a 4m, 5m or 6m column is available.
Choice of root mount (direct burial) or flange mount (surface) type base.
Standard columns are galvanised steel, tubular and with a 76mm diameter top.
The root mount column is supplied with an additional 750mm to 1000mm for burial.
The flange mount column is supplied with an anchor kit and template.
Heavier duty columns of 89mm and 114mm diameter are available by special order.
Other column heights are available by special order.
Coloured painted or powder coated finishes are available by special order.
Supplied with a MPPT charge controller which automatically controls the solar panel power, battery charging and lighting function and operation.
Ultra fast Maximum Power Point Tracking (MPPT).
The MPPT charge controller is typically 30% more efficient than standard PWM controllers and 10% more efficient to most other MPPT controllers.
Additional efficiency for cloudy weather and during times of reduced sun radiation.
This controller features the very latest smart technology.
Provides extended battery life and extra protection against excessive battery discharge and overcharge.
Battery life algorithm operates 24/7.
Low voltage detection for automatic disconnect.
Continuous environment, input and output power management.
The controller is sized to the system specifications with 10A and 15A versions available (subject to solar panel wattage and battery capacity).
Pre-programmed software for load output, dusk to dawn lighting, single timed lighting, dual timed lighting, dimming option and the ability of interfacing with motion detection, where required.
This MPPT charge controller is programmed by Solar Illuminations as per your requirements and system ability.
Lighting control features illumination from dusk to dawn (where applicable), or on at dusk for X amount of hours then off, or on at dusk for X amount of hours, then off, then back on again for X amount of hours before dawn.
Dimming option (where applicable) allows the lighting to dim at any time during the illumination time.
The dimming option or any other illumination mode can be used in conjunction with motion activation (where applicable).
Dimming may be at any percentage from 1-99%.
Supports real time data monitoring (iPhone, Andriod, Mac or PC) with optional interface and/or Bluetooth dongle.
Battery voltage 12/24V dc auto select.
Rated charge current 10A/15A.
Maximum PV power (12V dc) is 135W at 10A and 200W at 15A.
Maximum PV power (24V dc) is 270W at 10A and 400W at 15A.
Maximum PV open circuit is 75V dc.
Peak efficiency is 98%.
Charge voltage (absorption) is 14.4V dc.
Charge voltage (float) is 18.8V dc.
Multi stage adaptive charge algorithm.
Automatic temperature compensation.
Low voltage load disconnect at 11.1V dc to 11.8V dc (12v dc system) or 22.2V dc to 23.6V dc (24V dc system) or battery life algorithm.
Low voltage load reconnect at 13.1V dc to 14V dc (12V dc system) or 26.2V dc to 28V dc (24V dc system).
Protection feature includes battery reverse polarity (fuse), output short circuit and over temperature.
Operating temperature is -30 deg. C (-22 deg. F) to +60 deg. C (140 deg. F).
Humidity up to 95%, non condensing.
Power terminals are AWG 10 (6mm2).
Protection rating IP22 (connection terminal area).
Weight is 500g (1.1 Lbs).
Dimensions are approx. 10cm x 10cm x 4cm (4” x 4” x1.5”).
Please note: Upon installation and power-up the controller goes into a 7 day evaluation mode where smart monitoring and configurations commence. Additional evaluation with self-managing adjustments may continue for up to 7 more days. This is all part of the smart feature that enables this intelligent controller to understand its use, the application, the surrounding environment and the current conditions. During this time some of its programmed features may differ temporarily. This is a perfectly normal process and must be accepted during that time. During this time the controller will adjust to the current condition and charge status of the batteries. It is therefore recommended that all batteries are 100% fully charged before connection using an appropriate battery charger. This may significantly reduce the evaluation mode time of 7+7 days to much less. The solar panel(s) should be connected to the MPPT charge controller first, followed by the fully charged batteries.
Installation guide included.
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and set facing South at about a 45-60 degree angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.