This professional, commercial grade, solar lamp post light is ideal for a
variety of different applications. It's perfect for footpaths, school, trails,
parks, promenades, housing estates and general recreation area lighting,
etc. Supplied as a complete system. You also have a choice of either a
root mount or flange mount column and choice of column height. The luminaire incorporates up to 20W of LED power (up to 2,600 lumens),
an integrated solar panel, an integral, pre-installed
lithium battery, and a highly efficient programmable MPPT
charge controller. Several lighting modes are available which can be
programmed into the system
prior to dispatch. The built-in controller will adjust the illumination
power accordingly
in the event of unfavorable weather conditions. Refer to the
illumination mode options table in the product pictures.
An unpainted, galvanized steel (grey/silver) finish is supplied as
standard. A black, painted finish is available as an option, for an
additional charge. Colour of luminaire is black. Colour of light output is white. Please note - This is a special order item and is usually made to order.
Applications
This solar lamp post light is perfect for illuminating small streets, footpaths, parks, open areas,
playgrounds, public areas, car parks, private communities and
developments, promenades, housing estates, trails, entrances and such
like. It may also be used for residential applications too.
Technical Specifications
Performance
Dusk to dawn illumination or programmed as per customer requirements.
Illumination settings include dimming, a motion sensor, and/or timer.
Please refer to the illumination options table show in product images.
Up to 3 days reserve (autonomy) power to allow for cloudy days (subject to local conditions).
Commercial grade quality.
I.P. 65 weather rating.
Luminaire
Lamp emits up to 2,600 lumens, or programmed accordingly.
Supplied with up to 20W of LED power, or programmed accordingly.
White LED color temperature (5,000 to 6,000k).
Aluminum, glass, and polycarbonate construction.
Black coloured finish.
The complete luminaire is approx. 46cm (18") tall and 57cm (22.5") wide (at its widest).
Battery
An integral 12.8V 20Ah lifePO4 battery is supplied and pre-installed.
Battery is replaceable when necessary.
Battery life expectancy is typically up to 5 years.
Column
A choice of 3M, 4M, or 5M column is available and will be included.
Choice of root mount (direct burial) or flange mount (surface) type base.
Standard columns are galvanised steel, tubular and with a 76mm diameter top.
The root mount column is supplied with an additional 750mm to 1000mm for burial.
The flange mount column is supplied with an anchor kit and template.
Heavier duty columns of 89mm and 114mm diameter are available by special order and at extra cost.
A heavier duty column will be required for high wind zones areas and when larger solar panels are specified for the system.
Other column heights are available by special order.
An unpainted, galvanized steel (grey/silver) finish is supplied as
standard. A black, painted finish is available as an option, for an
additional charge.
Coloured painted or powder coated finishes are available by special order.
Controller
Integrated MPPT charge controller supplied.
Charge controlled is typically programmed to desired illumination setting or mode prior to dispatch.
Prevents over charge and over discharge of battery.
Controls light operation.
Solar Panel
A 45W solar panel is supplied.
The solar panel is neatly and discreetly integrated into the top of the light fitting.
Installation
This luminaire requires full exposure throughout the day.
Avoid installing in shaded areas, around trees or tall structures.
Ideally 3M (10') or 4M (13') would be our recommended installation height.
Notes
Please Note: This product is a special order and is non-returnable except in
the event of a fault (during its warranty period) when the product, once
returned will be repaired or replaced.
The solar panel must be
installed in a location where it can receive full direct sunshine (when
available) and set facing South at about a 45-60 degree angle (where
adjustment options allow). The solar panel must not be installed in a
shaded or part shaded location and never indoors. The standard
specifications of the system (particularly the solar panel Wattage and
battery capacity) may need to be adjusted. These components are
determined by your geographic location, power consumption (LED Wattage)
and the total amount of hours of illumination time required. Such
changes to the standard specifications may increase or decrease the cost
shown. Please contact us for more information or assistance. The
illumination time is estimated and subject to various factors including
(but not limited to) geographic location, seasons, temperature, weather
conditions & location of product etc. The illumination time of most
solar lights can reduce during winter months when the weather is poor
and the days are shorter. During this time insolation hours decrease
accordingly. Shorter illumination time due to one or more of the above
factors does not define the product as being ‘defective’ or ‘not as
described’. All solar lights must be used in a completely dark location
at night time otherwise they may not illuminate. Nearby strong lighting
sources or ambient lighting may affect the operation of a solar light.
This does not define the product as being 'defective' or 'not as
described'. Please note, if you do not install or use this product for
several months the battery may discharge naturally on its own. By
allowing a battery to deep discharge it may cause irreversible damage as
the battery may then lose the ability to recharge or hold a full
charge. Although unlikely, we reserve the right to supply this product
with any minor alterations or minor changes to the specifications (shown
above by text description or by photographs) due to different supplies
or product batches received, incorporating such product changes made by
the manufacturer, without further notice. Descriptions, specifications
and photographs are updated regularly but may not be current when minor
changes to a product have only recently been made.
