This professional system includes a powerful 10W LED floodlight (1330 Lumen), solar panel, battery box, batteries, choice of 3m or 4m root mount or flange mount steel column and all necessary hardware. Choice of one or two lamp system. Price from £999.99.
This commercial grade column and floodlight package is perfect for lighting up areas up to about 12 metres x 12 metres. The entire system is plug & play for easy installation. The floodlight has a light output 1330 Lumens (equal to approx. 200W). This system is supplied with a metal lockable battery box, two 12 Volt rechargeable batteries, MPPT charge controller, solar panel, a 3 or 4 meter galvanised steel column (root mount or flange mount), and column mount hardware for the system to attach to the top of the column. The solar panel and battery size are subject to the number of light fittings and the required illumination time. The floodlight can be positioned at any point on the pole and has angle adjustment to enable the desired lighting pattern. Fully automatic activation (on at dusk and off at dawn). The charge controller can be programmed to illuminate from dusk to dawn, turn off after a certain number of hours, or it can use a dual timer option. The dual timer allows the light to activate at dusk and illuminate for X hours, switch off, and then turn back on for X hours prior to sunrise. An additional 10W LED floodlight can be added to this system as an option. This system can be supplied with a manual on/off switch instead of the automatic mode. It can also be supplied with a remote control on/off switch instead of the automatic on at dusk facility. Both of these features are optional extras and are available upon request. Colour of light fitting is bronze. Colour of other parts of the system are grey. Colour of light output is white.
Ideal for lighting up footpaths, driveways, playgrounds, public spaces, loading docks, small car parks, open areas and such like. Ideal for convenience and security lighting. Suitable for commercial or residential applications. Perfect for use where electricity is unavailable or too costly to install.
A complete, professional, commercial grade LED lighting system.
Manufactured in an ISO9001:2008 'Quality Assured' facility.
Illumination time is subject to the solar panel and battery configuration.
System includes one or two weatherproof floodlight fitting.
10W LED fitting has a light output of 1,330 lumens (equal to approx. 200W of incandescent lighting).
20W LED fitting has a light output of 2,660 lumens. The floodlight is fitted with approx. 5.5 metres of pre-plugged cable.
Additional cable and extension cords are available.
The floodlight fiiting is weather rated to I.P 65.
Bronze coloured finish.
The lampshade is supplied with a 'U' shape mounting bracket which allows for vertical adjustment of the light beam spread.
The floodlight bracket may be positioned at any point on the column above or below the hardware kit.
Lampshade dimensions (main lamp body) approx. 28 cm x 30.5 cm x 10 cm (LxWxD).
Two 12V sealed lead acid batteries are supplied.
Battery capacity is subject to the number of light fittings and required illumination time.
Batteries must be connected together in series.
A remote battery box is supplied to accommodate the batteries, and charge controller.
The battery box has a hinged lid which is lockable (padlock not included).
The battery box has sockets for the lights, and solar panel to connect to.
The battery box is approx. 33cm x 25cm x 22.5cm (13" x 9.88" x 8.88") LxWxD.
Dimensions including lid over-hang are approx. 40cm x 25cm x 22.5cm (15.75” x 9.88” x 8.88”).
Mounting hardware is included to attach the battery box onto the side of the column.
Supplied with an aluminium framed solar panel.
Solar panel size is subject to number of light fittings and required illumination time.
Supplied with approximately 5m (17’) of cable to connect directly to the battery box.
Mounting hardware is included to attach the solar panel onto the side of the column.
A choice of a 3m or 4m column is available.
Choice of root mount (direct burial) or flange mount (surface) type base.
Standard columns are galvanised steel, tubular and with a 76mm diameter top.
The root mount column is supplied with an additional 750mm to 1000mm for burial.
The flange mount column is suplied with an anchor kit and template.
Heavier duty columns of 89mm and 114mm diameter are available by special order.
Other column heights are available by special order.
Coloured painted or powder coated finishes are available by special order.
Supplied with a MPPT charge controller which automatically controls the solar panel power, battery charging and lighting function and operation.
Ultra fast Maximum Power Point Tracking (MPPT).
The MPPT charge controller is typically 30% more efficient than standard PWM controllers and 10% more efficient to most other MPPT controllers.
Additional efficiency for cloudy weather and during times of reduced sun radiation.
This controller features the very latest smart technology.
Provides extended battery life and extra protection against excessive battery discharge and overcharge.
Battery life algorithm operates 24/7.
Low voltage detection for automatic disconnect.
Continuous environment, input and output power management.
The controller is sized to the system specifications with 10A and 15A versions available (subject to solar panel wattage and battery capacity).
Pre-programmed software for load output, dusk to dawn lighting, single timed lighting, dual timed lighting, dimming option and the ability of interfacing with motion detection, where required.
This MPPT charge controller is programmed by Solar Illuminations as per your requirements and system ability.
Lighting control features illumination from dusk to dawn (where applicable), or on at dusk for X amount of hours then off, or on at dusk for X amount of hours, then off, then back on again for X amount of hours before dawn.
Dimming option (where applicable) allows the lighting to dim at any time during the illumination time.
The dimming option or any other illumination mode can be used in conjunction with motion activation (where applicable).
Dimming may be at any percentage from 1-99%.
Supports real time data monitoring (iPhone, Andriod, Mac or PC) with optional interface and/or Bluetooth dongle.
Battery voltage 12/24V dc auto select.
Rated charge current 10A/15A.
Maximum PV power (12V dc) is 135W at 10A and 200W at 15A.
Maximum PV power (24V dc) is 270W at 10A and 400W at 15A.
Maximum PV open circuit is 75V dc.
Peak efficiency is 98%.
Charge voltage (absorption) is 14.4V dc.
Charge voltage (float) is 18.8V dc.
Multi stage adaptive charge algorithm.
Automatic temperature compensation.
Low voltage load disconnect at 11.1V dc to 11.8V dc (12v dc system) or 22.2V dc to 23.6V dc (24V dc system) or battery life algorithm.
Low voltage load reconnect at 13.1V dc to 14V dc (12V dc system) or 26.2V dc to 28V dc (24V dc system).
Protection feature includes battery reverse polarity (fuse), output short circuit and over temperature.
Operating temperature is -30 deg. C (-22 deg. F) to +60 deg. C (140 deg. F).
Humidity up to 95%, non condensing.
Power terminals are AWG 10 (6mm2).
Protection rating IP22 (connection terminal area).
Weight is 500g (1.1 Lbs).
Dimensions are approx. 10cm x 10cm x 4cm (4” x 4” x1.5”).
Please note: Upon installation and power-up the controller goes into a 7 day evaluation mode where smart monitoring and configurations commence. Additional evaluation with self-managing adjustments may continue for up to 7 more days. This is all part of the smart feature that enables this intelligent controller to understand its use, the application, the surrounding environment and the current conditions. During this time some of its programmed features may differ temporarily. This is a perfectly normal process and must be accepted during that time. During this time the controller will adjust to the current condition and charge status of the batteries. It is therefore recommended that all batteries are 100% fully charged before connection using an appropriate battery charger. This may significantly reduce the evaluation mode time of 7+7 days to much less. The solar panel(s) should be connected to the MPPT charge controller first, followed by the fully charged batteries.
Installation guide included.
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and set facing South at about a 45-60 degree angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.
|Solar Lights Data|
|Lumen Output||1330 Lumens.|
|Equivalent Incandescent Wattage||Approx. 200 Watts.|
|Approximate Illumination Time||Subject to solar panel and battery configuration.|
|Approximate Illumination Area||Up to 12 x 12 metres.|
|Solar Panel Wattage||From 100 Watts.|
|Column Included||3m or 4m.|