This is a very latest integrated, two-in-one, solar powered area light system. A professional, commercial grade split style system using high output LED technology. Exclusive to Solar Illuminations. Perfect for new installations and for retro-fit applications too.
New for 2020, this is a totally self-contained, fully integrated lighting system that is ideal for illuminating streets, car parks and a multitude of different outdoors areas that require lighting after dusk. This system is fully programmable and fully configurable to meet the needs for almost any application. We can supply any LED power from 1W to 40W (and even up to 100W for our overseas customers). Being a split style system, this is important especially for our UK customers where the solar panel is best installed at an angle of around 60 degrees. Standard all-in-one systems do not offer this. Featuring the lastest LED technology using high output, Philips Luxeon LEDs. This state-of-the-art lighting system can operate using up to 3 different, programmable modes during the night, for chosen durations and with selectable levels of light output. All modes can be used with or without motion detection which is another built-in-feature. Colour of luminaire is black. Colour of light output is white.
For small streets, footpaths, trails, playgrounds, multi use games areas (MUGA), car parks, yards, and storage facilities, etc. Ideal for general area lighting or security lighting in and around commercial buildings. Perfect for customers seeking a fast, efficient, convenient solution to area lighting.
Unique, integrated, split type lighting system.
Programmed to operate as per end-user requirements.
Multiple features and options.
Fully configurable to meet almost every requirement.
Up to 3 stages (modes) can be programmed and applied to any of the illumination times and outputs mentioned below.
You can select whether you want to use 1 , 2 or 3 stages (modes).
Each stage (mode) can be set to operate at any time during the night and at any interval from 0-15 hours.
For example, the light can come on at dusk in the 1st stage for x amount of hours at x percentage of brightness, then in the 2nd stage operate for x amount of hours at x percentage of brightness, then in the 3rd stage operate for x amount of hours at x percentage of brightness.
If any of the stages (modes) are set between 10 and 90% brightness, the motion detector (when activated) can adjust the lighting to be brighter or to full brightness.
The illumination time for 100% full brightness lighting is adjustable from 0-15 hours (default is 4 hours).
The illumination output is adjustable from 10 to 100% without motion detection.
The illumination output is adjustable from 10% to 100% with motion detection.
The motion detection delay time is adjustable from 0 to 250 seconds (default is 10 seconds).
The lighting control delay is adjustable from 1 to 50 minutes (default is 1 minute).
A typical mode would be programmed so that the lighting automatically come on at dusk at 30% brightness until dawn. It will revert to 100% brightness when motion or activity is detected.
Another typical mode would be the lighting to turn on at dusk at 100% brightness for several hours, then revert to 25% brightness for the remaining hours until dawn.
The motion sensor can be activated or deactivated to work in conjunction with any of the modes, at any time, for any duration and to control the lighting at any brightness.
Choice of LED power from 5W to 40W.
60W, 80W or 100W version are available by special order for export customers (Non UK locations).
High output Philips Luxeon LEDs providing 150lm/W.
Based on 100% full brightness the lumen output is shown below, for each LED power option.
At 5W the light output will be 750 lumens.
At 10W the light output will be 1,500 lumens.
At 15W the light output will be 2,250 lumens.
At 20W the light output will be 3,000 lumens.
At 25W the light output will be 3,750 lumens.
At 30W the light output will be 4,500 lumens.
At 35W the light output will be 5,250 lumens.
At 40W the light output will be 6,000 lumens.
60W, 80W and 100W version are available for overseas/export customers.
IES file available upon request.
IP65 weather rating.
Temperature range is -20 deg C (-4 deg F) to +80 deg C (+176 deg F).
LED colour temperature choice is 3000k to 6500k.
Integrated 360 degree microwave motion sensor.
Black powder coated finished to main body section.
Standard coloured finish is black.
Other colours by special order.
Certifications include CE, IEC, TUV, IESNA, RoHS, LM-79 and LM-80.
Manufactured in an ISO9001 quality assured facility.
A support arm is included to allow the luminaire to attach to the column.
Black coloured finish.
Bespoke colours by special order only.
Supplied with a pre-installed lithium (LIFEPO4) battery.
Typical lifespan is over 10 years and is replaceable.
Integrated MPPT charge controller.
Battery management system (BMS) feature.
Over-load, over current, over temperature, over voltage, over charge and over discharge monitoring and protection.
The battery voltage is 12.8V DC (25.6V DC for the 58.5A-Hr version).
The 30W version is supplied with a 36A-Hr battery.
The 40W version is supplied with a 49A-Hr battery.
The 60W version is supplied with a 72A-Hr battery.
The 80W version is supplied with a 90A-Hr battery.
The 100W version is supplied with a 58.5A-Hr battery.
High quality, integrated monocrystalline solar panel.
Full adjustment to allow 360 degree rotation and 0 to 80 degree adjustable tilt.
In the UK the solar panel should face as south as possible and at about a 60 degree angle.
The solar panel attached directly to the top of a suitable 76mm OD column.
Grade A rated with tempered glass.
Solar panel voltage is 18V DC (36V DC for the 285W version).
The 30W version is supplied with a 125W solar panel.
The 40W version is supplied with a 135W solar panel.
The 60W version is supplied with a 195W solar panel.
The 80W version is supplied with a 210W solar panel.
The 100W version is supplied with a 285W solar panel.
The system is designed for quick and easy installation.
The solar panel attaches to the top of a suitable 76mm (3”) diameter column.
The LED luminaire attaches to the side of the column using the support arm included.
For use in extreme, coastal or windy locations, consider using a heavy duty column (89mm diameter) with a 89mm to 76mm reducing tenon/spigot.
This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and set facing South at about a 45-60 degree angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time, insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’ or 'not fit for purpose'. All solar lights must be used in a dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.
|Solar Lights Data|
|Lumen Output||Variable. Up to 6,000lm.|
|Equivalent Incandescent Wattage||Variable. Up to 500W.|
|Approximate Illumination Time||Variable.|
|Approximate Illumination Area||Variable. Up to 25M x 25M.|
|Solar Panel Wattage||Variable. Up to 285W.|
|Programable Controller||Yes. Pre-programmed.|