For applications where an all-in-one, integrated solar LED area light is required, then this fitting may be an ideal choice. It is available in three different versions. 60W, 80W or 100W LED power offering 6,500 to 10,500 lumens when at full 100% output. This fitting is designed to attach to a 76mm OD (3”) round column. Installation should be quick and easy. On the top of the fitting, you will find an integrated solar panel. On the underside, you will find a set of powerful LEDs and a PIR/motion sensor. You can select the desired operational mode you require using the IR remote control that is included. Once set, it will be retained in the memory. The LED power (brightness) is also adjustable with 100%, 70% and 50% options available. This solar powered area light offers three different modes. Timed mode - This provides automatic illumination at dusk at 100%, 70%, or 50% output. Motion sensor mode - This provides automatic illumination at dusk upon motion detection at either 100%, 70%, or 50% output. Mixed mode - This provides automatic illumination at dusk for up to 6 hours at 100%, 70%, or 50% output, then off, except upon motion detection until dawn at 100%, 70%, or 50% output. Colour of product is grey. Colour of light output is white.
Applications
Suitable for a wide range of different applications including small streets, footpaths, playgrounds, storage areas, commercial yards and compounds, etc. Ideal for use in conjunction with one or more CCTV cameras.
Technical Specifications
Performance
All-in-one, integrated fitting.
IP65 rated.
Choice of three user/installer selectable programs.
Programs are set-up and selected using an IR remote control (included).
Timed mode options include 6 hours, 9 hours, or 12 hours. LED power can be set to 50%, 70%, or 100% output.
PIR/motion sensor mode options include on at 33% output and will 00% when motion is detected.
Mixed mode options include illumination at full power (100%) for x hours and then switch to PIR/motion sensor for the remainder of the night.
Luminaire
Integrated, all-in-one design.
Choice of 60W, 80W, or 100W LED power.
PIR/motion sensor detection range (at ground level) is up to 6M (20') forward and with a 90 degree detection spread, up to 4M (13') left/right.
The detection range will vary based on mounting height, local ambient temperature, etc.
5,500~6,000k LED color temperature.
Status LEDs indicate charge, battery, and lamp status.
Pinhole on/off switch.
There are 3 mode options available which can be selected using the supplied IR remote control.
Timed mode – Offers automatic illumination at dusk at 100%, 70%, or 50% output.
PIR/motion sensor mode – Offers automatic illumination at dusk upon motion detection at either 100%, 70%, or 50% output.
Mixed mode – Offers automatic illumination at dusk for up to 6 hours at 100%, 70%, or 50% output, then off, except upon motion detection until dawn at 100%, 70%, or 50% output.
The 60W model emits 6,500 lumens at full power.
The 80W model emits 8,500 lumens at full power.
The 100W model emits 10,500 lumens at full power.
The 60W model dimensions approx. 96cm x 35cm x 10cm (38" x 14" x 4") LxWxD.
The 80W model dimensions approx.. 112cm x 35cm x 10cm (44" x 14" x 4") LxWxD.
The 100W model dimensions approx. 127cm x 35cm x 10cm (50" x 14" x 4") LxWxD
Battery
A large lithium (LifePO4) battery is supplied and is pre-installed within the fitting.
60 Watt model supplied with a 12.8V 302 Watt-hour battery.
80 Watt model supplied with a 12.8V 403 Watt-hour battery.
100 Watt model supplied with a 12.8V 502 Watt-hour battery.
The long life battery is replaceable when required.
The system has built-in charge control with over-charge and discharge protection.
Solar Panel
Fitted with glass covered solar panel which is integrated into the top section of the fixture.
The 60W model is fitted with a 64 Watt solar panel.
The 80W model is fitted with a 85 Watt solar panel.
The 100W model is fitted with a 102 Watt solar panel.
Installation
Short support arm and mounting bracket is included.
Easy installation onto a round column (ideally 76mm OD (3”).
Ideal mounting heights for the models are as follows:
60W up to 8M (26');
80W up to 9M (29');
100W up to 10M (33’).
Best installed at locations where the solar panel can get maximum exposure, ideally from a direction where the solar panel faces as South as possible.
Notes
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and set facing South at about a 45-60 degree angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.
PDF Data
